Specifications

Crestron Commercial Lighting Design Guide
38 Doc. 4775B | Crestron.com
DIN-2MC2
The DIN-2MC2 is a 2-channel motor control module designed
to provide control of bidirectional motors for drapes, shades,
projection screens, lifts, skylights, and gates. Each channel
supports up/down or open/close control of a conventional
3-wire bidirectional type motor up to ½ HP. Built-in timing and
interlock logic make it easy to program the DIN-2MC2 for
failsafe operation.
• Dual-channel bidirectional motor control
• Supports 120 to 240 volt 50/60 Hz
• Setup via front panel or software
• Programmable functionality via DIN-AP2
DIN-AO8
The DIN-AO8 is an automation control module that provides
eight analog output ports for interfacing with third-party lighting
and heating/cooling systems.
• Eight 0-10 V analog output control ports (Maximum
sink current 20mA per channel)
• Interface for 3rd-party lighting and heating/cooling
• Programmable functionality via DIN-AP2
• Setup via front panel or software
Analog Outputs
Each analog output port provides a 0 to 10 volt DC control
signal ideally suited for controlling 0-10 V lighting dimmers and
heating/cooling valves. 10-bit resolution ensures precise recall
of lighting and climate control settings and smooth ramping
between levels.
DIN-IO8
The DIN-IO8 is an automation control module that provides eight
Versiport I/O ports for interfacing with a wide range of third-party
devices and systems. Each Versiport can be configured via
software to function as a digital or analog sensing input or as a
digital trigger output.
• 8 Versiport I/O ports
• Interface for 3rd-party sensors, detectors, contact
closures, and alarms
• Fully programmable functionality via DIN-AP2