Specifications

Crestron Commercial Lighting Design Guide
Doc. 4775B | Crestron.com 35
GLXX-2DIM8
The GLXX-2DIM8 is a Crestron Green Light Express dimming module which features 8 channels of incandescent,
magnetic low-voltage, and 2- and 3-wire fluorescent dimming. The module is part of a complete Crestron
engineered GLPX Green Light Express dimming or switching panel.
8 channels of incandescent, MLV, 2-wire fluorescent
dimming
4 channels of 3-wire fluorescent dimming
Phase-Synchronous detection eliminates lamp flicker
Selectable non-dim mode
Supports 100 to 277 volt applications
16 Amp load rating per channel
Short circuit and overload protection
Positive air gap at each output
Phase-independent channels
Cresnet communications
Redundant power capabilitymodule powered via line or
Cresnet
Local controls for testing and verification
Local and remote override capability
Non-volatile power failure memory
Load Ratings
Switch Channels
8
Per Channel
16 amps at 100-277 Vac, 50/60 Hz
Dim Load Types
Incandescent, Magnetic Low-Voltage, Neon/Cold Cathode, 2-
wire Fluorescent
Ballast, or 3-wire Fluorescent Ballast (uses adjacent channel for 3rd wire, i.e.
channels 1 & 2 are to be used for one 3-wire load)
Switch Load Types Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode,
Fluorescent Ballast, High-Intensity Discharge
Power Requirements
Primary
100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N1)
Secondary (optional)
5 watts at 24 Vdc, supplied via Cresnet
Environmental
Temperature
32° to 104°F (0° to 40°C)
Humidity
10% to 90% RH (non-condensing)
Heat Dissipation
154 BTU/Hr
Electrical Regulatory Certifications
UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
UL924, Emergency Power Equipment
IEC60669-2-
1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for
fluorescent lamp circuits or other capacitive loads)
SCCR Rating - 65kA
CE