Specifications

Crestron Commercial Lighting Design Guide
34 Doc. 4775B | Crestron.com
GLXP-DIMFLV8-LP
The GLXP-DIMFLV8-LP is a Crestron Green Light architectural dimming module which features 8 channels of
4-wire, 0-10 Volt fluorescent dimming. The module is part of a complete Crestron engineered GLPD Green Light
dimming panel.
•
8 channels of 4-wire 0-10 volt fluorescent dimming
• Compatible with lighting and motor loads
• Supports 100 to 277 volt applications
• 16 amp load rating per channel
• Arc-less switching
• Positive air gap at each output
• Phase-independent channels
• Cresnet communications
• Redundant power capability—module powered
via line or Cresnet
• Local controls for testing and verification
• Local and remote override capability
• Non-volatile power failure memory
Load Ratings
Dimmer Channels
8
Per Channel
16 amps at 100-277 Vac 50/60 Hz
0.5 HP @ 120 volts, 1 HP @ 230 volts, 1 HP @ 277 volts
Dim Load Types
0-10 volt fluorescent ballast (4-wire); 60 mA max current sink
Switch Load Types Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode,
Fluorescent Ballast, High-Intensity Discharge, Motor
Relay Lifetime
1,000,000 on/off operations at full electronic ballast load
Power Requirements
Primary
100-277 Volts AC, 50/60Hz, supplied via channel 1 (L1, N1)
Secondary (optional)
5 watts at 24 Volts DC, supplied via Cresnet
Environmental
Temperature
32° to 104°F (0° to 40°C)
Humidity
10% to 90% RH (non-condensing)
Heat Dissipation
116 BTU/Hr
Electrical Regulatory Certifications
UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
UL924, Emergency Power Equipment
IEC60669-2-
1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for
fluorescent lamp circuits or other capacitive loads)
SCCR Rating - 65kA
CE