Specifications

Crestron Commercial Lighting Design Guide
32 Doc. 4775B | Crestron.com
GLXP-HSW8-LP and GLXP-HSW12-LP
The GLXP-HSW8-LP and GLXP-HSW12-LP are Crestron Green Light switching modules which feature 8 or 12
channels of high-inrush power switching with rugged, high-current latching relays. The modules are part of a
complete Crestron engineered GLPS Green Light switching panel.
• 8 or 12 channels of high-inrush power switching
• Rugged, high-current latching relays
• Supports 100 to 277 volt applications
• 16 amp, 1 HP load rating per channel
• Arc-less switching
• Positive air gap at each output
• Phase-independent channels
• Cresnet communications
• Redundant power capability—module powered via
line or Cresnet
•
Local controls for testing and verification
• Local and remote override capability
• Non-volatile power failure memory
Load Ratings
Switch Channels
8 or 12
Per Channel
16 amps at 100-277 Vac, 50/60 Hz
0.5 HP @ 120 volts, 1 HP @ 230 volts, 1 HP @ 277 volts
Switch Load Types
Incandescent, Magnetic Low-Voltage, Electronic Low-Voltage, Neon/Cold Cathode,
Fluorescent Ballast, High-Intensity Discharge, Motor
Relay Lifetime
1,000,000 on/off operations at full electronic ballast load
Power Requirements
Primary
100-277 Vac, 50/60Hz, supplied via channel 1 (L1, N1)
Secondary (optional)
5 watts at 24 Vdc, supplied via Cresnet
Environmental
Temperature
32° to 104°F (0° to 40°C)
Humidity
10% to 90% RH (non-condensing)
Heat Dissipation HSW8: 112 BTU/Hr
HSW12: 160 BTU/Hr
Electrical Regulatory Certifications
UL508, Section 41 (Endurance Test) and Section 61C (Electronic Ballasts)
UL924, Emergency Power Equipment
IEC60669-2-1, Section 19.102 (Contact mechanisms incorporated in electronic switches, intended for
fluorescent lamp circuits or other capacitive loads)
SCCR Rating - 18kA
CE