Specifications

Crestron Commercial Lighting Design Guide
Doc. 4775B | Crestron.com 19
Power Switching
Crestron Green Light Power Switching products are designed for control of lighting in office buildings,
warehouses, parking garages, sports facilities, public spaces, and anywhere centralized switching is required.
With a range of panel sizes and configurations available, every system is fully scalable to custom-fit each
installation. An extensive selection of Crestron keypads, touch screens, occupancy sensors, photocells, shade
controllers, and numerous other peripheral options afford astounding design flexibility with unparalleled capability
for integration.
• Centralized switching system with integrated main lug and branch breakers
• Keypads and touch screens offer flexible control anywhere
• Astronomical clock allows events to be scheduled around sunrise/sunset
• Sensor integration for occupancy sensing and daylight harvesting
• Emergency override assures reliable lighting in critical areas
GLPS panels come with integrated circuit breakers. Power switching without integrated circuit breakers is
available in the GLPX panel from the Green Light Express product line. To learn more or configure a GLPX panel,
see the Green Light Express section on page 28.
When to Specify Power Switching
If you need load switching and have a large amount of lighting circuits, Power Switching panels are the tool for the
job. When specifying, keep in mind that the panel requires all lighting wiring to run to a single location, preferably
a utility room where the panel can be installed. A single panel can control up to 42 lighting circuits. If necessary,
configure multiple panels and easily connect them using Crestron’s control system. With Power Switching panels,
no job is too big.