Specifications

Crestron Commercial Lighting Design Guide
10 Doc. 4775B | Crestron.com
GLPD Panels
Crestron GLPD Architectural Dimming panels can dim a wide range of lighting types. There are many
configurations available for any budget or need. This text describes how to design your suitable panel
configuration and how to name it for ordering.
GLPD Panel Naming System
When ordering an architectural dimming panel, construct a model name as shown above. Possible choices are
listed underneath each blue box. The numbered steps below describe each part of the name in detail.
Examples: GLPD-DIM-MCB80-24-120-10K and GLPD-DIM-FT-36
1. Module Type GLPD-DIM-___-___-___-___
GLPD panels are only available with DIM modules. If you want to mix dimming, switching and 0-10V lighting
control into a single cabinet, see the GLPD-C product on page 12. The GLPD-C panel is a custom panel with
three possible module types.
Key:

- Switchable
Module
 - Dimmable
DIM
Load Types
2 and 3-wire fluorescent

MLV/ELV

Incandescent

Neon/cold cathode

Standard LED

0-10V LED

0-10V fluorescent

HID and Motor

Voltage
100 to 277 Volts
Additional Module Info
Page 15
2. Feed Type GLPD-DIM-___-___-___-___
MLO Main Lug Only with 20A branch breakers
MCB60 60A back-fed main circuit breaker with 20A branch breakers
MCB80 80A back-fed main circuit breaker with 20A branch breakers
MCB100 100A back-fed main circuit breaker with 20A branch breakers
MCB125 125A back-fed main circuit breaker with 20A branch breakers
FT Feed-thru with no integrated branch breakers
AIC Rating
Voltage
Number of
Loads
GLPD
-
Module
Type
Feed Type
DIM
- - - -
MLO
MCB60
MCB80
MCB100
MCB125
FT
120
277
10K
18K
22K
35K
65K
1
2
3
...
58
59
60