Specifications

Crestron Commercial Lighting Design Guide
8 Doc. 4775B | Crestron.com
Lighting Systems
Architectural Dimming
Crestron Green Light Architectural Dimming products are designed for control of lighting in theaters, restaurants,
offices, and anywhere centralized dimming is desired. With a range of panel sizes and configurations available,
every system is fully scalable to custom-fit each installation. An extensive selection of Crestron keypads, touch
screens, occupancy sensors, photocells, shade controllers, and numerous other peripheral options afford
astounding design flexibility with unparalleled capability for integration.
• Centralized dimming system
• Available with integrated main lug and branch breakers
• Keypads and touch screens offer flexible control anywhere
• Astronomical clock allows events to be scheduled around sunrise/sunset
• Sensor integration for occupancy sensing and daylight harvesting
• Emergency override assures reliable lighting in critical areas
GLPD panels are available with integrated circuit breakers. GLPD panels without integrated circuit breakers are
known as “feed-thru” cabinets. Dimming in a feed-thru cabinet is also available with the GLPX panel from the
Green Light Express product line. To learn more or configure a GLPX panel, see the Green Light Express section
on page 28.
When to Specify Architectural Dimming
If you need to dim a large amount of lighting loads, Architectural Dimming panels are the tool for the job. When
specifying, keep in mind that the panel requires all load wiring to home-run to a single location, preferably a utility
room where the panel can be installed. A single panel can control up to 60 lighting loads. If necessary, multiple
panels can be configured and connected through the control system. With Architectural Dimming panels, no job is
too big.