Specifications

Crestron e-Schedule Programmer’s Guide
Real Time Machine
The Real Time Machine tab of the Preferences dialog box is used to
specify IP Addresses and other system settings.
• Scheduler Gateway IP Address—specifies the IP Address of
the CNX Gateway computer for the Real-Time Engine. This IP
Address may or may not be the same as that of the Web Server.
(See Web Server Gateway IP Address, below.)
• Web Server Gateway IP Address—specifies the IP Address of
the CNX Gateway computer for the Web Server.
• Check for scheduled events every ‘n’ seconds—configures the
Real-Time Engine to check for scheduled events at the specified
interval. Crestron recommends the default setting. (See NOTE,
below.)
NOTE: Crestron recommends using the default settings for periodic system
checks, as lengthening or shortening the time interval may adversely affect
system response.
Programmer’s Guide e-Schedule – DOC. 5919 • 27