Specifications

Crestron e-Schedule Programmer’s Guide
RealTimeSrcStatus (Scheduler_Events.mdb)
Field Name Description
SrcId The ID number of the source, taken from
Cfg_Hardware_Source.
SrcStatus This field must be initialized to the default setting
of “0”, indicating that the source is “Ready”.
Example 4 (below and following page) – Configuration table for head end VCR
source device, with corresponding entries in tables for real-time status, location,
switcher, format type and channels. The control system that controls both the VCR
and switcher is located at IP Address 192.168.2.173.
Database Table: Cfg_Hardware_Source
Database Table: Status_Src
SrcStatusId 3
SrcStatusDesc Ready
Database Table: RealTimeSrcStatus
SrcId 3
SrcStatus 0
Database Table: Cfg_Hardware_Switcher
SwitcherId 1
SwitcherName AutoPatch
IPAddress 192.168.2.173
IPID 8
Database Table: Cfg_Hardware_LegalChannels
ChannelId 1
ChannelNumber 11
ChannelName VCR-1
SwitcherInput 0 (ignored in broadband)
ValidChannel Yes
Database Table: RealTimePages
BasicPageId 1
Comment VCR
Database Table: Cfg_Hardware_Source_FormatType
FormatTypeId 1
Format VHS
Database Table: Cfg_Area_ Locations
LocationId 1
LocationName Law School
VCR1
SrcId 3
SrcName VCR-1
LocationId 1
IPAddress 192.168.2.173
IPID 6
SwitcherID 1
FormatTypeId 1
Basic Web Page 1
Channel 1
Programmer’s Guide e-Schedule – DOC. 5919 • 15