Specifications

Crestron e-Schedule Programmer’s Guide
Cfg_Hardware_Source
Field Name Description
SrcID Each source device must be assigned a unique
identifier, starting with 1 and proceeding
sequentially—gaps are permitted.
SrcName The name of the device (i.e., TV Tuner), referenced
by the Source ID and displayed in the user
interface.
LocationID The location of the source device. This ID number
is taken from the table Cfg_Area_Locations.
RealTimeMachineID Taken from Cfg_Hardware_RealTimeMachine,
this ID number must be “1”.
IPAddress The static IP Address of the control system for this
device.
IPID The decimal equivalent of the Cresnet IP ID of the
device.
SwitcherID For baseband systems, this is the switcher used by
the device. This ID number is taken from the table
Cfg_Hardware_Switcher. (Ignored in broadband
systems.)
FormatTypeId The ID number taken from
Cfg_Hardware_Source_FormatType.
BasicWebPage This ID number must be taken from the
BasicPageID field of the table RealTimePages,
located in the read-only database,
Scheduler_RealTimeControl. (Currently the
choices are: 1 = VCR; 2 = DVD; 3 = Projector;
4 = Environment; and 5 = TV Tuner.)
Channel In broadband systems only, this ID number must
be the same as the ChannelId taken from the table
Cfg_Hardware_LegalChannels. (Ignored in
baseband systems.)
Enable Check box to enable or “remove” the device in the
system.
Programmer’s Guide e-Schedule – DOC. 5919 • 14