Specifications

Software Crestron e-Control
®
The configuration shown below uses the “hardware” gateway that is built into the
2-Series control processor; the Web pages are stored in the control system’s internal
Web server. This configuration supports a maximum of 30 simultaneous connections.
(The CNXENET+ card supports up to five simultaneous connections.)
Web browser
Connected to http://192.168.1.200
192.168.1.XXX Ethernet Network
Control System/Gateway (192.168.1.200)
Web server: HTML Pages (IP ID 04)
e-Control PC Interface (IP Address: 127.0.0.1, IP ID 04)
Controlled Devices
TCP
TCP
Web browser
Connected to http://192.168.1.200
TCP
CIP
40 • Crestron e-Control® Reference Guide – DOC. 6052