Crestron DTT-15V3 ® DualTouch Technology Touch Screen Operations Guide
This document was prepared and written by the Technical Documentation department at: Regulatory Compliance As of the date of manufacture, the DTT-15V3 has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules.
Crestron DTT-15V3 DualTouch® Technology Touch Screen Contents DualTouch® Technology Touch Screen: DTT-15V3 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Applications.................................................................................................................
DualTouch® Technology Touch Screen Crestron DTT-15V3 ® DualTouch Technology Touch Screen: DTT-15V3 Introduction The DTT-15V3 is a 15" touch screen designed for use with the UPX-2 Universal Presentation System to support all of the control capabilities of a Crestron® touch screen, plus pen-based annotation and computer-based multimedia presentation.
DualTouch® Technology Touch Screen Crestron DTT-15V3 Enhanced Ergonomics The DTT-15V3 features a completely flat bezel for exceptional drawing comfort and reduced overall size. The adjustable stand allows the touch screen to be tilted between 17 and 73 degrees. Annotation response and feel are improved over previous models. The pressure sensitive pen is both cordless and battery-free for superior performance and reliability.
DualTouch® Technology Touch Screen Crestron DTT-15V3 Specifications Specifications for the DTT-15V3 are listed in the following table. DTT-15V3 Specifications SPECIFICATION Touch Screen Display Display Screen Size Resolution Color Depth Contrast Ratio Brightness Viewing Angle Touch Screen DETAILS TFT active matrix color LCD 15 inch (381 mm) diagonal 1024 x 768 pixels (XGA) 16.
DualTouch® Technology Touch Screen Crestron DTT-15V3 NOTE: Crestron software and any files on the Web site are for authorized Crestron dealers and Crestron Authorized Independent Programmers (CAIPs) only. New users may be required to register to obtain access to certain areas of the site (including the FTP site). Physical Description This section provides information on the connections, controls and indicators available on the DTT-15V3.
DualTouch® Technology Touch Screen Crestron DTT-15V3 DTT-15V3 Physical View 1.91 in (49 mm) 11.93 in (303 mm) 13.56 in (345 mm) DTT-15V3 Physical View – Right Side (Maximum and Minimum Height) 11.50 in (292 mm) 11.48 in (292 mm) 4.34 in (111 mm) 8.57 in (218 mm) Operations Guide – DOC. 6632C 12.
DualTouch® Technology Touch Screen Crestron DTT-15V3 DTT-15V3 Physical View – Rear (Stand Not Shown) DTT-15V3 Connectors, Controls & Indicators 8 6 9 10 6 1 2 3 4 5 7 6 • DualTouch® Technology Touch Screen: DTT-15V3 Operations Guide – DOC.
DualTouch® Technology Touch Screen Crestron DTT-15V3 Connectors, Controls & Indicators # CONNECTORS, CONTROLS & INDICATORS USB 1 Pin 1 Pin 2 Pin 4 Pin 3 DESCRIPTION (1) USB B female; USB 2.0 port; Connects to any USB port on UPX-2 using 6 ft (2.
DualTouch® Technology Touch Screen Crestron DTT-15V3 Connectors, Controls & Indicators (Continued) # CONNECTORS, CONTROLS & INDICATORS DESCRIPTION 5 Pen Tray Located on the bottom front edge of the touch screen; Provides a convenient resting place for the pen. When the display stand is set to its lowest position, place fingers beneath the tray and slide it out. 6 Communications Port (2) Communications ports for system diagnostics CAUTION: Do not connect any devices to this port.
DualTouch® Technology Touch Screen Crestron DTT-15V3 Setup Configuring the Touch Screen NOTE: The only connection required to configure the touch screen is power. Refer to “Hardware Hookup” which starts on page 16 for details. The touch screen display can be configured using the four setup buttons on the top of the DTT-15V3. Power is required to configure the touch screen. Refer to “Hardware Hookup” which starts on page 16 for information on connecting power.
DualTouch® Technology Touch Screen 3. Crestron DTT-15V3 Phase – Use the (-)/(+) buttons to manually reduce horizontal distortion lines. The Reset option ENTER to save. is used for automatic adjustment. Press Phase Control 4. Pitch – Use the (-)/(+) buttons to manually reduce vertical distortion lines. The Reset option save. is used for automatic adjustment. Press ENTER to Pitch Control 5. Horizontal Center – Use the (-)/(+) buttons to manually move the image left or right.
DualTouch® Technology Touch Screen Crestron DTT-15V3 6. Vertical Center – Use the (-)/(+) buttons to manually move the image up or down. The Reset option ENTER to save. is used for automatic adjustment. Press Vertical Center Control 7. Menu Position – Use the (-)/(+) buttons to move the menu to one of the available nine positions. Press ENTER to save. Default is center position. Menu Position Control 8. Reset – Use AUTO ADJUST to reset only the image parameters (menus 1 through 6).
DualTouch® Technology Touch Screen 9. Crestron DTT-15V3 Backlight – Use the (-)/(+) buttons to increase or decrease the backlight brightness. Press ENTER to save. Default is 80. Backlight Control 10. Color – Provides a color temperature selection of 9300K, 6500K, 5000K, DIRECT (no adjustment to the incoming signal) and a USER option to use the independent RGB adjustment. Click the icon to allow an independent adjustment of red, green and blue. Press ENTER to save. Defaults are shown as follows.
DualTouch® Technology Touch Screen Crestron DTT-15V3 11. Language – Use the (-)/(+) buttons to select a language for the display adjustment menus. Press ENTER to save. Default is English. Language Control Supplied Equipment The DTT-15V3 is shipped with the following accessories. Operations Guide – DOC.
DualTouch® Technology Touch Screen • Crestron DTT-15V3 (1) Pen tether and tether hardware Installation VESA Mount The DTT-15V3 may be removed from the adjustable stand and remounted in a VESA® conforming mount arm or stand. The Video Electronics Standards Association (VESA) is an international non-profit corporation that supports and sets industry wide interface standards for the PC, workstation and computing environments.
DualTouch® Technology Touch Screen Crestron DTT-15V3 VESA Mounting Rear of DTT-15V3 Alternate Mounting Platform M4 Screws 4 mm wide 0.7 mm pitch 15 mm maximum length CAUTION: When attaching the DTT-15V3 to an alternate mounting platform, be sure to follow all instructions supplied by the manufacturer. Install Pen Tether The pen can be tethered to the DTT-15V3 using the supplied tether and tether hardware. 1.
DualTouch® Technology Touch Screen Crestron DTT-15V3 Hardware Hookup Refer to the following illustration and complete the connections as specified. Ensure power is removed from both the UPX-2 and the DTT-15V3 before beginning. CAUTION: To avoid damage to the DTT-15V3 or to the video card, never connect or disconnect the video or power cable while the DTT-15V3 or the UPX-2 are powered. NOTE: The USB cable may be extended using up to four 16-foot active extensions.
DualTouch® Technology Touch Screen Crestron DTT-15V3 Hardware Connections for the DTT-15V3 KENSINGTON SECURITY SLOT PEN HOLDER VESA MOUNT USB: TO UPX-2 DC IN (12V): FROM POWER SUPPLY ANALOG RGB OUT: TO AUXILIARY MONITOR ANALOG RGB IN: FROM UPX-2 USB ACCESSORY (x2): TO USB KEYBOARD OR USB MOUSE PEN TRAY CAUTION: Do not apply excessive pressure to the touch screen display during handling. Doing so can crack the screen and damage the touch screen.
DualTouch® Technology Touch Screen Crestron DTT-15V3 Replacing Pen Tips The pen comes with five extra tips. The pen tip wears with normal use. Worn tips feel more drag when drawing or seem to be scratching the overlay. The tip can be easily replaced with one of the extra pen tips. Replacement pens and a 5-pack of replacement pen nibs are available from the Wacom Web site (www.wacom.com). 1. Grasp the worn tip with a pair of needle-nose pliers, tweezers or similar instrument and pull out the tip. 2.
Crestron DTT-15V3 DualTouch® Technology Touch Screen Using the Pen While working with the DTT-15V3, the user can rest their hand on the surface of the display screen, just as if they were drawing on a sheet if paper. The pen is activated as soon as it enters proximity, about 0.2 inches (5 mm) above the surface. This allows the user to position the screen cursor before touching the pen tip to the surface. When the pen tip contacts the surface of the DTT-15V3, the tip switch is activated.
DualTouch® Technology Touch Screen Crestron DTT-15V3 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DTT-15V3 Troubleshooting TROUBLE DTT-15V3 does not function. POSSIBLE CAUSE(S) CORRECTIVE ACTION The DTT-15V3 is not receiving power (The POWER LED is off). Verify cable connections and power to unit. The DTT-15V3 is receiving power.
Crestron DTT-15V3 DualTouch® Technology Touch Screen Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron Web site (www.crestron.com/manuals).
DualTouch® Technology Touch Screen Crestron DTT-15V3 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from Crestron. To obtain warranty service for Crestron products, contact an authorized Crestron dealer. Only authorized Crestron dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron DTT-15V3 DualTouch® Technology Touch Screen This page is intentionally left blank. Operations Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6632C (2019290) 08.12 Specifications subject to change without notice.
