Crestron DTT-17 DualTouch™ Technology Touchpanel Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners.
DualTouch™ Technology Touchpanel Crestron DTT-17 Contents DualTouch™ Technology Touchpanel: DTT-17 1 Introduction ........................................................................................................................1 Features and Functions .............................................................................................................. 1 Specifications .........................................................................................................................
DualTouch™ Technology Touchpanel Crestron DTT-17 DualTouch™ Technology Touchpanel: DTT-17 Introduction Features and Functions The DTT-17 is a 17-inch touchpanel designed for use with the UPX-2 Universal Presentation System. The Crestron® exclusive DualTouch™ Technology Touchpanel (patent pending) allows the DTT-17 to function both as a touchpanel and a pen-based annotation device to produce an amazingly flexible presentation solution.
Crestron DTT-17 DualTouch™ Technology Touchpanel DTT-17 DualTouch Technology Touchpanel and UPX-2 Universal Presentation Processor Typical Application DTT-15V2 RoomView® USB RGB Plasma Display RGB RoomView Room & Facility Management Control Streaming Video via Ethernet/LAN and NetMeeting Component Video USB Control Webcam DVD LAN S-Video Control VCR UPX-2 Digital Media Storage Server RGB RGB PRO2 Computers Control Control Control Cresnet Crestron Commercial Lighting 2 y DualTouch™ Te
DualTouch™ Technology Touchpanel Crestron DTT-17 Specifications The following table provides a summary of specifications for the DTT-17. DTT-17 Specifications SPECIFICATION Power Requirements DETAILS 45 Watts (3.
Crestron DTT-17 DualTouch™ Technology Touchpanel Physical Description The electronic hardware is housed in a black molded plastic enclosure, shown in the following illustration. This touchpanel is designed for placement on a counter. It possesses an adjustable stand, which can tilt from 15 to 72 degrees. All video and power connections are made at the rear of the unit. Each DTT-17 LCD panel is produced under very stringent quality control standards.
DualTouch™ Technology Touchpanel Crestron DTT-17 DTT-17 Physical View – Side and Front Dimensions DTT-17 Physical View – Side (Maximum and Minimum Height) Operations Guide – DOC.
Crestron DTT-17 DualTouch™ Technology Touchpanel DTT-17 Physical View – Rear (Stand Not Shown) The DTT-17 is shipped with the following accessories. One Pen (with tip replacements) and One Pen Stand One USB Cable Approximately 6-feet long. One DVI/I RGB Cable Approximately 6-feet long. One Power Supply and Line Cord 6 y DualTouch™ Technology Touchpanel: DTT-17 Operations Guide – DOC.
DualTouch™ Technology Touchpanel Crestron DTT-17 Ports The ports are located on the right rear side of the DTT-17 under a slide-off protective cover. The serial connector is not used in this application. USB 2.0 One Universal Serial Bus (USB) type “B” female connector is provided for data transfer, and may be connected to any of the four USB ports on the UPX-2, although the port shown on page 10 is the preferred port.
Crestron DTT-17 DualTouch™ Technology Touchpanel Controls and Indicators A power on/off switch and a power LED are located in the upper right corner of the DTT-17. The DTT-17 conforms to VESA and ENERGY STAR® power savings guidelines. When using this device with a VESA Display Power Management Signaling (DPMS) compliant computer or graphics card, the DTT-17 automatically complies with the following power saving parameters.
DualTouch™ Technology Touchpanel Crestron DTT-17 Setup Hardware Hookup Refer to the following diagrams and complete the connections as specified. Ensure that the UPX-2 and the DTT-17 are both powered down before beginning. CAUTION: To avoid damage to the DTT-17 or to your video card, never connect or disconnect the video or power cable while the DTT-17 or the UPX-2 are powered up.
Crestron DTT-17 DualTouch™ Technology Touchpanel Connecting the DTT-17 to the UPX-2 Analog/Digital Switch Must Be in the Analog Position Serial Port Not Used in This Application USB Connector Power Supply Power Connector Line Cord DVI/I RGB Connector To AC Cable Guides RGB Connector to OUTPUT A UPX-2 Connect to Preferred USB port 6. Use the molded cable guides to secure the cables to the back of the DTT-17. 7. Replace the protective cover on the back of the DTT-17. 8.
DualTouch™ Technology Touchpanel Crestron DTT-17 Display Settings Four controls are located on the upper right front side of the DTT-17 for display setup. Display Controls The Menu button provides access to the following 11 adjustment menus. Use the Selection (-)/(+) buttons to select a menu or advance forward or backward through the 11 menus. Press the Enter button to open and save the selected menu. 1. Contrast – Use the selection (-)/(+) buttons to decrease or increase contrast.
Crestron DTT-17 DualTouch™ Technology Touchpanel 4. Pitch – Use the (-)/(+) buttons to manually reduce vertical distortion lines. ) is used for automatic adjustment. Press Enter to The Reset menu ( save. Default is 127. PITCH R G R B 127 48.3KHz - + / ENTER 60Hz ESC MENU 5. Horizontal Center – Use the (-)/(+) buttons to manually move the image left ) is used for automatic adjustment. Press or right. The Reset menu ( Enter to save. Default is 50. 6.
DualTouch™ Technology Touchpanel Crestron DTT-17 Click the icon to independently adjust red, green and blue. The default values are shown. Press Enter to save. NOTE: Manual changes invalidate the standard profile settings. 8. Menu Position – Use the (-)/(+) buttons to move the menu to one of the available nine positions. Press Enter to save. Default is center position. 9. Reset – Use AUTO ADJUST to reset only the image parameters (menus 1 through 6).
Crestron DTT-17 DualTouch™ Technology Touchpanel 11. Language – Use the (-)/(+) buttons to select a language for the display adjustment menus. Press Enter to save. Default is English. NOTE: There are additional setup screens that are resident in the UPX-2. Please refer to the latest version of the UPX-2 Operations Guide (Doc. 6276) for details. Using the Pen While working with the DTT-17, you can rest your hand on the surface of the display screen, just as if you were drawing on a sheet if paper.
DualTouch™ Technology Touchpanel Crestron DTT-17 Grasp the worn tip with a pair of needle-nose pliers, tweezers, or similar instrument and pull out the tip. Firmly slide the new tip (square end first) into the barrel of the pen and press in until it stops. NOTE: A badly worn pen tip may damage the surface. Cleaning Keep the pen and screen surface clean. Dust and dirt particles can stick to the pen and cause wear to the screen surface. Regular cleaning will help to prolong the life of your equipment.
Crestron DTT-17 DualTouch™ Technology Touchpanel Alternative Mounting The DTT-17 may be removed from the adjustable stand and remounted to a VESA® conforming mount arm or stand. The Video Electronics Standards Association (VESA) is an international non-profit corporation that supports and sets industrywide interface standards for the PC, workstation, and computing environments.
DualTouch™ Technology Touchpanel Crestron DTT-17 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DTT-17 Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION The DTT-17 is not receiving power. The Power LED is off. Verify cable connections and power to unit. The DTT-17 is receiving power. The Power LED is on.
Crestron DTT-17 DualTouch™ Technology Touchpanel Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone, refer to the Crestron website (www.crestron.com) for a listing of Crestron worldwide offices.
DualTouch™ Technology Touchpanel Crestron DTT-17 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6343 (2012349) 01.06 Specifications subject to change without notice.
