Crestron DTT-17V3 DualTouch™ Technology Touchpanel Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2007 Crestron Electronics, Inc.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel Contents DualTouch™ Technology Touchpanel: DTT-17V3 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Applications.................................................................................................................
Crestron DTT-17V3 DualTouch™ Technology Touchpanel DualTouch™ Technology Touchpanel: DTT-17V3 Introduction The DTT-17V3 is a 17" touchpanel designed for use with the UPX-2 Universal Presentation System to support all of the control capabilities of a Crestron touchpanel, plus pen-based annotation and computer-based multimedia presentation.
DualTouch™ Technology Touchpanel Crestron DTT-17V3 Enhanced Ergonomics The DTT-17V3 features a completely flat bezel for drawing comfort and reduced overall size. The adjustable stand allows the touchpanel to be tilted between 17 and 73 degrees. The pressure-sensitive pen is both cordless and battery-free for performance and reliability. Versatile Installation Features The DTT-17V3 ships complete with tilt stand, cables, and power supply.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel Specifications Specifications for the DTT-17V3 are listed in the following table. DTT-17V3 Specifications SPECIFICATION DETAILS Touchscreen Display Display Screen Size Resolution Color Depth Contrast Ratio Brightness Viewing Angle TFT active matrix color LCD 17 inch (43.2 cm) diagonal 1280 x 1024 pixels (SXGA) 16.
DualTouch™ Technology Touchpanel Crestron DTT-17V3 NOTE: Crestron software and any files on the website are for authorized Crestron dealers and Crestron Authorized Independent Programmers (CAIP) only. New users may be required to register to obtain access to certain areas of the site (including the FTP site). Physical Description This section provides information on the connections, controls and indicators available on your DTT-17V3.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel DTT-17V3 Physical View 2.19 in (5.55 cm) 14.26 in (36.22 cm) 15.76 in (40.03 cm) DTT-17V3 Physical View – Right Side (Maximum and Minimum Height) 13.78 in (34.99 cm) 13.85 in (35.18 cm) 5.08 in (12.91 cm) 8.41 in (21.37 cm) Operations Guide – DOC. 6633A 13.40 in (34.
DualTouch™ Technology Touchpanel Crestron DTT-17V3 DTT-17V3 Physical View – Rear (Stand Not Shown) DTT-17V3 Connectors, Controls & Indicators 6 7 8 1 2 3 4 5 6 • DualTouch™ Technology Touchpanel: DTT-17V3 Operations Guide – DOC.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel Connectors, Controls & Indicators # CONNECTORS, CONTROLS & INDICATORS USB 1 Pin 1 Pin 2 DESCRIPTION (1) USB B female; USB 2.0 port; Pin 4 Pin 3 2 DC IN (12V) 3 ANALOG RGB IN Connects to any USB port on UPX-2 using 6 ft (2.0 m) USB cable (included) PIN DESCRIPTION 1 +5 VDC 2 Data - 3 Data + 4 Ground (1) DC power jack (power supply included) (1) DB15HD female; RGB (VGA) video input; Connects to RGB Output A of UPX-2 using 6 ft (2.
DualTouch™ Technology Touchpanel Crestron DTT-17V3 Connectors, Controls & Indicators (Continued) # CONNECTORS, CONTROLS & INDICATORS 5 USB MOUSE/KEYBOARD DESCRIPTION (2) USB Type A female USB 2.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel Setup Configuring the Touchpanel NOTE: The only connection required to configure the touchpanel is power. Refer to “Hardware Hookup” on page 16 for details. The touchpanel display can be configured using the four setup buttons on the top of the DTT-17V3. Power is required to configure the touchpanel. Refer to “Hardware Hookup” on page 16 for information on connecting power.
DualTouch™ Technology Touchpanel 3. Crestron DTT-17V3 Phase – Use the (-)/(+) buttons to manually reduce horizontal distortion lines. The Reset option to save. is used for automatic adjustment. Press Enter Phase Control 4. Pitch – Use the (-)/(+) buttons to manually reduce vertical distortion lines. The Reset option save. is used for automatic adjustment. Press Enter to Pitch Control 5. Horizontal Center – Use the (-)/(+) buttons to manually move the image left or right.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel 6. Vertical Center – Use the (-)/(+) buttons to manually move the image down or up. The Reset option to save. is used for automatic adjustment. Press Enter Vertical Center Control 7. Menu Position – Use the (-)/(+) buttons to move the menu to one of the available nine positions. Press Enter to save. Default is center position. Menu Position Control 8. Reset – Use AUTO ADJUST to reset only the image parameters (menus 1 through 6).
DualTouch™ Technology Touchpanel 9. Crestron DTT-17V3 Backlight – Use the (-)/(+) buttons to decrease or increase the backlight brightness. Press Enter to save. Default is 80. Backlight Control 10. Color – Provides a color temperature selection of 9300K, 6500K, 5000K, DIRECT (no adjustment to the incoming signal) and a USER option to use the independent RGB adjustment. Click the icon to allow an independent adjustment of red, green and blue. Press Enter to save. Defaults are shown as follows.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel 11. Language – Use the (-)/(+) buttons to select a language for the display adjustment menus. Press Enter to save. Default is English. Language Control Supplied Equipment The DTT-17V3 is shipped with the following accessories. Operations Guide – DOC. 6633A • (1) Pen (with five tip replacements) • (1) USB Cable; Approximately 6-feet long. • (1) VGA to VGA Cable; Approximately 6-feet long.
DualTouch™ Technology Touchpanel • Crestron DTT-17V3 (1) Pen Tether Installation VESA Mount The DTT-17V3 may be removed from the adjustable stand and remounted to a VESA® conforming mount arm or stand. The Video Electronics Standards Association (VESA) is an international non-profit corporation that supports and sets industry-wide interface standards for the PC, workstation, and computing environments.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel VESA Mounting Rear of DTT-17V3 Alternate Mounting Platform M4 Screws 4 mm wide 0.7 mm pitch 15 mm maximum length CAUTION: When attaching the DTT-17V3 to an alternate mounting platform, be sure to follow all instructions supplied by the manufacturer. Install Pen Tether The pen can be tethered to the DTT-17V3 using the supplied tether and tether hardware.
DualTouch™ Technology Touchpanel Crestron DTT-17V3 diagram on page 17. To prevent unauthorized removal, you can attach one end of a Kensington security cable to this slot and the other end to an immovable object. Refer to the Kensington website for additional details (http://www.kensington.com). Hardware Hookup Refer to the following diagram and complete the connections as specified. Ensure that the UPX-2 and the DTT-17V3 are both powered down before beginning.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel Hardware Connections for the DTT-17V3 KENSINGTON SECURITY SLOT PEN HOLDER VESA MOUNT USB: TO UPX-2 DC IN (12V): FROM POWER SUPPLY ANALOG RGB IN: FROM UPX-2 ANALOG RGB OUT: TO AUXILIARY MONITOR USB ACCESSORY (x2): TO USB KEYBOARD OR USB MOUSE CAUTION: Do not apply excessive pressure to the touchscreen display during handling. Doing so can crack the screen and damage the touchpanel.
DualTouch™ Technology Touchpanel Crestron DTT-17V3 1. Grasp the worn tip with a pair of needle-nose pliers, tweezers, or similar instrument and pull out the tip. 2. Firmly slide the new tip (square end first) into the barrel of the pen and press in until it stops. NOTE: A badly worn pen tip will damage the screen surface. 18 • DualTouch™ Technology Touchpanel: DTT-17V3 Operations Guide – DOC.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel Using the Pen While working with the DTT-17V3, you can rest your hand on the surface of the display screen, just as if you were drawing on a sheet if paper. The pen is activated as soon as it enters proximity, about 0.2 inches (5 mm) above the surface. This allows you to position the screen cursor before touching the pen tip to the surface. When the pen tip contacts the surface of the DTT-17V3, the tip switch is activated.
DualTouch™ Technology Touchpanel Crestron DTT-17V3 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DTT-17V3 Troubleshooting TROUBLE DTT-17V3 does not function. POSSIBLE CAUSE(S) CORRECTIVE ACTION The DTT-17V3 is not receiving power (The Power LED is off). Verify cable connections and power to unit. The DTT-17V3 is receiving power.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (http://www.crestron.com/manuals). This link will provide a list of product manuals arranged in alphabetical order by model number.
DualTouch™ Technology Touchpanel Crestron DTT-17V3 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron DTT-17V3 DualTouch™ Technology Touchpanel This page is intentionally left blank. Operations Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 6633A (2019291) 11.07 Specifications subject to change without notice.
