Specifications

Crestron TPS-6X Series Isys 5.7” Wireless Touch Screens
Operations Guide – DOC. 6875C Isys 5.7” Wireless Touch Screens: TPS-6X Series • 7
TPS-6X Specifications (Continued)
SPECIFICATION DETAILS
Weight 1.6 lbs (720 g)
Included Accessories
Power Pack 24 Volt Power Pack, Universal
TPS-6X-BTP Internal Battery Pack
TPS-6X-DS Desktop Docking Station (specify color)
(included with TPS-6X models only)
TPS-6X-DS-LP Low Profile Docking Station (specify color)
(included with TPS-6X-LP models only)
TPS-6X-FP-NB No Button Bezel (specify color)
TPS-6X-IMCW Interface Module
TPS-6XNL-DS Desktop Docking Station, No Lock (specify
color) (included with TPS-6XNL models only)
Available Accessories
C2N-IRGW-1G Wall Mount IR Gateway
C2N-IRGW-F Flush Mount IR Gateway
CEN-ERFGW-POE Extended Range RF Wireless Gateway
CENI-ERFGW-POE Extended Range RF Wireless Gateway -
International Version, 230 V
CNXRMIRD IR Receiver
CRESCAT Crestron Home CAT5 AV Cable
CRESNET Cresnet Control Wire
SMK-6X Swivel Mount Kit
TPS-6X-DS-C Desktop Docking Station,
Charging only (specify color)
TPS-6X-DSC-LP Low Profile Desktop Docking Station,
Charging only (specify color)
TPS-6X-DSW Wall Mount Docking Station (specify color)
TPS-6X-FP Button Bezel with Custom Engraving
(specify color)
TPS-6XNL-DS-C Desktop Docking Station, No Lock,
Charging only (specify color)
VMK-WIN TouchPoint Virtual Mouse & Keyboard
Software for Windows
®
1. When IR wireless is enabled, the RF transceiver is disabled and wired communications is restricted to
console functions (programming and configuration) only.
2. Touch screen must be docked to enable video or wired communication.
3. When the battery switch on the rear of the unit has been in the OFF position, as when the unit is
shipped or stored, the TPS-6X should be placed on its docking station/charger for a minimum of four
hours before using. Refer to “Battery Switch” on page 12 for details.
4. May be powered by 24 Volts DC or Cresnet network power but not both. All power connections are
made via the included TPS-6X-IMCW interface module.
5. The latest software versions can be obtained from the Crestron Web site. Refer to the NOTE
following these footnotes.
6. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
7. When loading VisionTools
®
Pro-e (VT Pro-e) files or firmware through the RS-232 port of the control
system, be sure that the baud rate is at 38400 (Cresnet speed) or lower. Otherwise, Crestron
Toolbox™ may post the “Transfer Failed” message.
8. Text engraving is not backlit on the white models. All models include default engraving. Custom
engraving sold separately. All buttons may be removed using the TPS-6X-FP-NB No-Button Bezel
(included).