Installation guide

Crestron DM-TX-200-2G/400-3G Wall Plate DigitalMedia™ CAT Transmitters
DM-TX-200-2G and DM-TX-400-3G Specifications (Continued)
SPECIFICATION DETAILS
Audio
Switcher
DM-TX-200-2G 2x1 combination digital/analog switch
DM-TX-400-3G
4x1 combination digital/analog switch,
limited audio breakaway
Input Signal Types
HDMI, DisplayPort Multimode
1
, S/PDIF
coaxial
3
, analog stereo
Output Signal Type DM CAT
Formats
HDMI
Dolby
®
Digital, Dolby Digital EX, DTS
®
,
DTS-ES, DTS 96/24, Up to 8ch PCM
SPDIF
3
Dolby Digital, Dolby Digital EX, DTS,
DTS-ES, DTS 96/24, 2ch PCM
Analog Stereo 2-channel
Analog-To-Digital Conversion 24-bit 48 kHz
Performance (Analog)
Frequency Response 20 Hz to 20 kHz ±0.75 dB
S/N Ratio >90 dB, 20 Hz to 20 kHz A-weighted
THD+N <0.05% @ 1 kHz
Stereo Separation >90 dB
Communication
DigitalMedia
DM CAT, DMNet, HDCP management,
EDID format management, CEC
USB Supports USB HID class devices
Power Requirements
DMNet Power Usage
DM-TX-200-2G 10 Watts (0.42 Amps @ 24 Volts DC)
DM-TX-400-3G 12 Watts (0.5 Amps @ 24 Volts DC)
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation
DM-TX-200-2G 35 BTU/Hr
DM-TX-400-3G 40 BTU/Hr
Enclosure
Construction Metal with black or white finish
(Continued on following page)
Operations & Installation Guide – DOC. 6949B Wall Plate DigitalMedia™ CAT Transmitters: DM-TX-200-2G/400-3G • 7