Installation guide

Crestron DM-TX-200 DigitalMedia™ CAT Transmitter 200
IP Configuration
For Ethernet connections, display the “System Info window (click the icon) and
select the Functions menu to display actions that can be performed on the
DM-TX-200.
When using the DM-TX-200 with a DM-RMC-100 (i.e. without a DM switcher), be
sure to use Crestron Toolbox to create the DM-TX-200 IP table.
1. Use the Device Discovery Tool to find the IP address of the DM-TX-200.
Then, in the Toolbox, display the “System Info” window and select the
DM-TX-200 entry from the Address Book.
2. Select Functions | IP Table Setup.
3. Add, modify or delete entries in the IP table. The DM-TX-200 can have
only one IP table entry.
4. A defined IP table can be saved to a file or sent to the device.
DM Tool
In the Crestron Toolbox Address Book, select the DM-TX-200. Then use the
DM Tool to configure EDID, HDCP or to troubleshoot AV on the DM-TX-200.
Refer to the help file for additional information.
DM Tool
Operations & Installation Guide – DOC. 6741C DigitalMedia™ CAT Transmitter 200: DM-TX-200 • 21