Installation guide

DigitalMedia™ CAT Transmitter 200 Crestron DM-TX-200
“Device Settings: Crestron DM-TX-200” Window
5. The ID code specified in the SIMPL Windows program must match the IP
ID of each unit. Refer to “Identity Code” on page 13
Program Manager
Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into Detail
View. Each signal in the symbol is described in the SIMPL Windows help file (F1).
Example Program
An example program for the DM-TX-200 is available from the Crestron website
(www.crestron.com/exampleprograms
).
18 • DigitalMedia™ CAT Transmitter 200: DM-TX-200 Operations & Installation Guide – DOC. 6741C