Installation guide

Crestron DM-TX-200 DigitalMedia™ CAT Transmitter 200
2. The system tree of the control system displays the device in the appropriate
slot with an IP ID as shown in the following illustration.
C2Net Device, Slot 8 (Using Input Card in DM Switcher)
NOTE: Alternatively, the DM-TX-200 can be dragged directly to a card such as the
C2ENET-2, in the Ethernet slot of the control system, when it is to be used without a
DM switcher.
C2Net Device, Slot 8 (Using Ethernet Slot on Control System)
3. Additional DM-TX-200 devices are assigned different IP ID numbers as
they are added.
4. If necessary, double click a device to open the “Device Settings” window
and change the IP ID, as shown in the following figure.
Operations & Installation Guide – DOC. 6741C DigitalMedia™ CAT Transmitter 200: DM-TX-200 • 17