Installation guide

DigitalMedia™ CAT Transmitter 200 Crestron DM-TX-200
Programming Software
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron website. To post a question or view questions you have
submitted to Crestron’s True Blue Support, log in at http://support.crestron.com.
First-time users will need to establish a user account.
Earliest Version Software Requirements for the PC
NOTE: Crestron recommends that you use the latest software to take advantage of
the most recently released features. The latest software is available from the Crestron
website.
Crestron has developed an assortment of Windows

-based software tools to develop
a controlled DigitalMedia system. For the minimum recommended software
versions, visit the Version Tracker page of the Crestron website
(www.crestron.com/versiontracker
).
Programming with SIMPL Windows
SIMPL Windows is Crestron’s premier software for programming Crestron control
systems. It is organized into two separate but equally important “Managers”.
Configuration Manager
Configuration Manager is the view where programmers “build” a Crestron control
system by selecting hardware from the Device Library.
In the example shown on the following page, the DM-TX-200 is being used in a
DigitalMedia system with a DM-MD8X8 Switcher, equipped with a DMC-CAT
input card. For details, refer to the latest version of the DigitalMedia Switchers
Operations Guide (Doc. 6755).
1. To incorporate the DM-TX-200 into the system, drag the DM-TX-200 from
the DigitalMedia | DM Transmitters folder of the Device Library and drop it
in the System Views.
Locating the DM-TX-200 in the Device Library
16 • DigitalMedia™ CAT Transmitter 200: DM-TX-200 Operations & Installation Guide – DOC. 6741C