Installation guide

DigitalMedia™ CAT Transmitter 200 Crestron DM-TX-200
DM-TX-200 Specifications (Continued)
SPECIFICATION DETAILS
Available Accessories
(Continued)
MP-WP130
Media Presentation Wall Plate – DB15HD
Computer VGA with Mini-TRS Stereo
Audio, Bulkhead
MP-WP131
Media Presentation Wall Plate – DB15HD
Computer VGA with Mini-TRS Stereo
Audio, Breakout
MP-WP140
Media Presentation Wall Plate – DVI-I with
Mini-TRS Stereo Audio
MP-WP150
Media Presentation Wall Plate – HDMI with
Mini-TRS Stereo Audio
MP-WP152 Media Presentation Wall Plate - HDMI
MP-WP160
Media Presentation Wall Plate –
DisplayPort with Mini-TRS Stereo Audio
MP-WP162 Media Presentation Wall Plate - DisplayPort
MP-WP185
Media Presentation Wall Plate – Crestron
DigitalMedia CAT with DMNet
1. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort
Multimode signal. CBL-HD-DVI and CBL-DP-HD interface cables sold separately.
2. The RGB input can accept component, composite and S-video signals via direct interface to Crestron
MPS Series products (sold separately) or through an appropriate adapter (not included). Input sync
detection is not provided for composite or S-video signal types through the RGB connection.
3. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following
these footnotes.
4. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
8 • DigitalMedia™ CAT Transmitter 200: DM-TX-200 Operations & Installation Guide – DOC. 6741C