Installation guide

Crestron DM-TX-200 DigitalMedia™ CAT Transmitter 200
DM-TX-200 Specifications (Continued)
SPECIFICATION DETAILS
Audio (Continued)
Performance (Analog)
Frequency Response 20 Hz to 20 kHz ±0.75 dB
S/N Ratio >90 dB, 20 Hz to 20 kHz A-weighted
THD+N <0.05% @ 1 kHz
Stereo Separation >90 dB
Communications
DigitalMedia
DM CAT, DMNet, HDCP management,
EDID format management, CEC
USB Supports USB HID class devices
Power Requirements
DMNet Power Usage 12 Watts (0.5 Amps @ 24 Volts DC)
Minimum 2-Series Control
System Update File
3, 4
Version 4.001.1012 or later
Environmental
Temperature 32º to 104º F (0º to 40º C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 41 BTU/Hr
Enclosure
Chassis Metal with black finish
Mounting
Freestanding, surface mountable (mounting
bracket included); also fits in a divided
Wiremold
®
6000 Series Raceway
Dimensions
Height 6.97 in (177 mm)
Width
2.76 in (70 mm)
3.95 in (100 mm) with mounting bracket
Depth 1.68 in (43 mm)
Weight 18 oz (493 g)
Available Accessories
CBL-AUDIO
Crestron Certified Mini-TRS Stereo Audio
Interface Cable
CBL-DP-HD
Crestron Certified DisplayPort to HDMI
Interface Cable
CBL-HD Crestron Certified HDMI Interface Cable
CBL-HD-DVI
Crestron Certified HDMI to DVI Interface
Cable
CBL-VGA
Crestron Certified Computer-VGA Interface
Cable
CBL-VGA-AUD
Crestron Certified Computer-VGA Interface
Cable with Mini-TRS Audio
DM-CBL DigitalMedia Cable
DM-CONN DigitalMedia Cable Connector
DM-DR DigitalMedia CAT Repeater
(Continued on following page)
Operations & Installation Guide – DOC. 6741C DigitalMedia™ CAT Transmitter 200: DM-TX-200 • 7