Installation guide

Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200
DigitalMedia 8G+™ Transmitter 200:
DM-TX-200-C-2G-FLOOR/
DM-TX-200-C-2G-WALL
DigitalMedia 8G+™ Transmitter 200:
DM-TX-200-C-2G-FLOOR/
DM-TX-200-C-2G-WALL
Introduction Introduction
The DM-TX-200-C-2G-FLOOR/DM-TX-200-C-2G-WALL is a DM 8G+™
transmitter and switcher that provides a convenient interface for computers and
high-definition AV sources as part of a complete DigitalMedia™ system.
The DM-TX-200-C-2G-FLOOR/DM-TX-200-C-2G-WALL connects to the head
end or display location using a single CAT5e or Crestron
®
DM 8G
®
cable.
The DM-TX-200-C-2G-FLOOR installs in a floor box (not included) or in an open,
ventilated area (for example, under a table). With both HDMI
®
and RGB inputs, the
DM-TX-200-C-2G-FLOOR is ideal for floor box applications in a boardroom,
classroom, or auditorium to provide an input for a laptop computer or similar source.
The DM-TX-200-C-2G-WALL installs in a 2-gang electrical box (not included) in
an insulated wall, floor, or ceiling. With both HDMI and RGB inputs, the
DM-TX-200-C-2G-WALL is ideal for wall and lectern applications in a boardroom,
classroom, or residence to provide an input for a laptop computer or similar source.
NOTE: Throughout the remainder of this guide, the DM-TX-200-C-2G-FLOOR
and DM-TX-200-C-2G-WALL are referred to simply as the DM-TX-200-C-2G
unless otherwise noted.
Features and Functions
• DigitalMedia 8G+ transmitter and multimedia interface
• Built-in 2x1 AV switcher
• DM 8G+ output supports up to 330 foot (100 meter) cable length
*
• Designed for installation in a 6 inch (153 mm) floor box (not included)
or in an open, ventilated area (DM-TX-200-C-2G-FLOOR only)
• Designed for installation in a 2-gang electrical box (not included)
(DM-TX-200-C-2G-WALL only)
(Continued on following page)
* For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G
DigitalMedia 8G™ cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia
D cable, or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended
to safeguard against unpredictable environmental electrical noise which may impact performance at
resolutions above 1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide
(Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc.
4789) for complete system design guidelines. The manuals are available from the Crestron Web site at
www.crestron.com/dmresources. All cable sold separately.
Operations & Installation Guide – DOC. 7255B DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G-FLOOR/WALL • 1