Installation guide

Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200

IP Configuration

If the DM-TX-200-C-2G is used in a standalone configuration (i.e., without a DM

switcher), use Crestron Toolbox to create the IP table entry of the

DM-TX-200-C-2G.

NOTE: If the DM-TX-200-C-2G is connected to a DM switcher, the IP table entry

of the DM-TX-200-C-2G is created automatically.

1. Use the Device Discovery Tool in Crestron Toolbox to find the IP address

of the DM-TX-200-C-2G. Then, display the “System Info” window (click

the

icon) and select the DM-TX-200-C-2G entry from the Address

Book.

2. Select Functions | IP Table Setup.

3. Add, modify or delete entries in the IP table. The DM-TX-200-C-2G can

have only one IP table entry.

4. A defined IP table can be saved to a file or sent to the device.

DMTool

In the Crestron Toolbox Address Book, select the DM-TX-200-C-2G. Then use the

DMTool to configure EDID, HDCP or to troubleshoot AV on the

DM-TX-200-C-2G. Refer to the help file for additional information.

DMTool

Operations & Installation Guide – DOC. 7255B DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G-FLOOR/WALL • 29