Installation guide

DigitalMedia 8G+™ Transmitter 200 Crestron DM-TX-200-C-2G-FLOOR/WALL
5. (Optional) If additional changes to TCP/IP settings are desired, do the
following:
a. Assign an IP address, IP mask, and default router for the
DM-TX-200-C-2G via Crestron Toolbox (Functions | Ethernet
Addressing).
b. Close the “System Info” window.
c. In Crestron Toolbox, change the Address Book entry for the
DM-TX-200-C-2G so that it uses the IP address assigned in step 5a.
d. Display the “System Info” window of the DM-TX-200-C-2G (click the
icon); communications are confirmed when the device information
is displayed.
Firmware
Firmware files may be distributed from programmers to installers or from Crestron
to dealers. Firmware upgrades are available from the Crestron Web site as new
features are developed after product releases. For details on upgrading, refer to the
Crestron Toolbox help file.
Check the Crestron Web site to find the latest firmware. (New users may be required
to register to obtain access to certain areas of the site, including the FTP site.)
To upgrade the DM-TX-200-C-2G firmware:
1. Do either of the following
• If the DM-TX-200-C-2G is connected to a DM switcher, use the
Device Discovery Tool in Crestron Toolbox to find the IP address of
the switcher.
• If the DM-TX-200-C-2G is being used in a standalone configuration
(i.e., without a DM switcher), use the Device Discovery Tool to find
the IP address of the DM-TX-200-C-2G.
2. Add the IP address found in step 1 to the Address Book in Toolbox.
3. Download the appropriate .puf file from the Crestron Web site to your PC.
4. Double-click the .puf file. The Toolbox Address Book opens.
5. From the list in the Address Book, select the DM switcher (if the
DM-TX-200-C-2G is connected to a switcher) or the DM-TX-200-C-2G (if
the DM-TX-200-C-2G is used in a standalone configuration), and then click
OK.
Either of the following occurs:
• If the DM switcher was selected, a DM device list is displayed that
allows upgrading of all DM devices connected to the switcher.
• If the DM-TX-200-C-2G was selected, a DM device list is displayed
that allows upgrading of the DM-TX-200-C-2G only.
In the DM device lists that are displayed, the checkbox of any item that
needs to be upgraded is automatically selected.
6. Click Update.
7. After the process is complete, click Recheck to verify the upgrade.
28 • DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G-FLOOR/WALL Operations & Installation Guide – DOC. 7255B