Installation guide

DigitalMedia 8G+™ Transmitter 200 Crestron DM-TX-200-C-2G-FLOOR/WALL
The system tree of the control system displays the DM-TX-200-C-2G in the
appropriate slot with a default IP ID as shown in the following illustrations.
In the first example, the DM-TX-200-C-2G is used with the DMC-C input
card in a DM-MD8X8 switcher (both sold separately). In the second
example, the DM-TX-200-C-2G is used with the C2ENET-2 card (sold
separately) in an Ethernet slot on the control system.
C2ENET-2 Device, Slot 8 (Using Input Card in a DM Switcher)
C2ENET-2 Device, Slot 8 (Using Ethernet Slot on Control System)
2. If additional DM-TX-200-C-2G devices are to be added, repeat step 1 for
each device. Each DM-TX-200-C-2G device is assigned a different IP ID.
3. If necessary, double click a device to open the “Device Settings” dialog box
and change the IP ID.
“Device Settings: Crestron DM-TX-200-C-2G” Dialog Box
NOTE: The ID code specified in the SIMPL Windows program must
match the IP ID of each unit. Refer to “Identity Code” on page 18.
24 • DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G-FLOOR/WALL Operations & Installation Guide – DOC. 7255B