Installation guide

Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200
3. For DM 8G+ wiring up to 330 feet (100 meters) between devices, use Crestron DM-CBL-8G
DigitalMedia 8G cable, Crestron DM-CBL DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D
cable, or generic CAT5e (or better) UTP or STP. Shielded cable and connectors are recommended to
safeguard against unpredictable environmental electrical noise which may impact performance at
resolutions above 1080p. Refer to the latest version of the Crestron DigitalMedia Infrastructure Guide
(Doc. 4556) for complete wiring guidelines and to the Crestron DigitalMedia Design Guide (Doc.
4789) for complete system design guidelines. All cable sold separately.
4. Either a power pack or PoDM—but not both—can be used to power the DM-TX-200-C-2G.
5. The latest software versions can be obtained from the Crestron Web site. Refer to the NOTE
following these footnotes.
6. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the Web site are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
Physical Description
This section provides information on the connections, controls and indicators
available on your DM-TX-200-C-2G.
DM-TX-200-C-2G-FLOOR Physical Views (Front and Rear)
Operations & Installation Guide – DOC. 7255B DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G-FLOOR/WALL • 9