Installation guide

Crestron DM-TX-200-C-2G-FLOOR/WALL DigitalMedia 8G+™ Transmitter 200
DM-TX-200-C-2G Specifications (Continued)
SPECIFICATION DETAILS
Audio
Switcher 2x1 combination digital/analog switch
Input Signal Types
HDMI, DisplayPort Multimode
1
, analog
stereo
Output Signal Type DM 8G+
Formats
HDMI
Dolby Digital
®
, Dolby Digital EX, DTS
®
,
DTS-ES, DTS 96/24, Up to 8ch PCM
Analog Stereo 2-channel
Analog-To-Digital Conversion 24-bit 48 kHz
Performance (Analog)
Frequency Response 20 Hz to 20 kHz ±0.75 dB
S/N Ratio >90 dB, 20 Hz to 20 kHz A-weighted
THD+N <0.05% @ 1 kHz
Stereo Separation >90 dB
Communications
DigitalMedia
DM 8G+, HDCP management, EDID
format management, CEC, PoDM
USB Supports USB HID class devices
Power Requirements
4
Power Pack
0.75 Amps @ 24 Volts DC;
100-240 Volts AC, 50/60 Hz power pack
included
PoDM
Receives power from a DM 8G+ PoDM
power sourcing device
Minimum 2-Series Control System
Update File
5, 6
Version 4.003.0029 or later
Environmental
Temperature
DM-TX-200-C-2G-FLOOR:
32° to 81° F (0° to 27° C)
DM-TX-200-C-2G-WALL:
32° to 95° F (0° to 35° C)
Humidity 10% to 90% RH (non-condensing)
Heat Dissipation 43 BTU/Hr
(Continued on following page)
Operations & Installation Guide – DOC. 7255B DigitalMedia 8G+™ Transmitter 200: DM-TX-200-C-2G-FLOOR/WALL • 7