Installation guide

DigitalMedia 8G Fiber Receiver 200 Crestron DM-RMC-200-S/S2
The system tree of the control system displays the DM receiver in the
appropriate slot with a default IP ID as shown in the following illustrations.
In the first example, the DM-RMC-200-S is used with the DMCO-40 output
card in a DM-MD8X8 switcher. In the second example, the
DM-RMC-200-S is used with the C2ENET-2 card in an Ethernet slot on the
control system.
C2ENET-2 Device, Slot 8 (Using Output Card in a DM Switcher)
C2ENET-2 Device, Slot 8 (Using Ethernet Slot on Control System)
2. If additional DM receivers are to be added, repeat step 1 for each device.
Each DM receiver is assigned a different IP ID.
3. If necessary, double-click a device to open the “Device Settings” window
and change the IP ID as shown in the following illustration.
“Device Settings: Crestron DM-RMC-200-S” Window
24  DigitalMedia 8G Fiber Receiver 200: DM-RMC-200-S/S2 Operations & Installation Guide – DOC. 7246B