Installation guide

DigitalMedia 8G Fiber Receiver 200 Crestron DM-RMC-200-S/S2
Specifications
Specifications for the DM receiver are listed in the following table.
DM-RMC-200-S/DM-RMC-200-S2 Specifications
SPECIFICATION DETAILS
Video
Scaler
1
HD video scaler, motion-adaptive
deinterlacer, interlacer, intelligent frame
rate conversion, Deep Color support,
3D to 2D conversion
2
, content-adaptive
noise reduction, widescreen format
selection (zoom, stretch, maintain
aspect ratio, or 1:1), video wall
processing (2 x 2, 3 x 2, 3 x 3, 4 x 3, or
4 x 4)
3
Input Signal Type DM-RMC-200-S: DM 8G fiber
(DigitalMedia over one multimode fiber
optic strand)
4
DM-RMC-200-S2: DM 8G SMF
(DigitalMedia over one single-mode fiber
optic strand)
4
Output Signal Types HDMI, DVI
5
Formats HDMI with Deep Color & 3D
2
, DVI,
HDCP content protection support
Input Resolutions
Progressive 640 x 480 @ 60 Hz
720 x 480 @ 60 Hz (480p)
720 x 576 @ 50 Hz (576p)
800 x 600 @ 60 Hz
848 x 480 @ 60 Hz
852 x 480 @ 60 Hz
854 x 480 @ 60 Hz
1024 x 768 @ 60 Hz
1024 x 852 @ 60 Hz
1024 x 1024 @ 60 Hz
1280 x 720 @ 50 Hz (720p50)
1280 x 720 @ 60 Hz (720p60)
1280 x 768 @ 60 Hz
1280 x 800 @ 60 Hz
1280 x 960 @ 60 Hz
1280 x 1024 @ 60 Hz
1360 x 768 @ 60 Hz
1365 x 1024 @ 60 Hz
1366 x 768 @ 60 Hz
1400 x 1050 @ 60 Hz
1440 x 900 @ 60 Hz
1600 x 900 @ 60 Hz
1600 x 1200 @ 60 Hz
1680 x 1050 @ 60 Hz
1920 x 1080 @ 24 Hz (1080p24)
1920 x 1080 @ 25 Hz (1080p25)
1920 x 1080 @ 50 Hz (1080p50)
1920 x 1080 @ 60 Hz (1080p60)
1920 x 1200 @ 60 Hz
plus any other resolution allowed by
HDMI up to 165 MHz pixel clock
(Continued on following page)
6  DigitalMedia 8G Fiber Receiver 200: DM-RMC-200-S/S2 Operations & Installation Guide – DOC. 7246B