Specifications

Crestron DM-MD8X8/16X16/32X32 DigitalMedia Switchers

Operations Guide – DOC. 6755D DigitalMedia Switchers: DM-MD8X8/16X16/32X32

•

HDCP Check Results

If the number of displays in use exceeds the number of devices supported

by the source, an error message will be displayed.

3. Press the soft button labeled OK to return to the list of options for the input

card.

Restore Defaults

Use the Restore Defaults function to reset the card to its factory settings. The card’s

factory settings are:

• Loopback Allow Deep Color: On

• Color Space Mode: Force RGB

• Enable/Disable input: Input enabled

• Brightness level: 0

• Contrast level: 0

• Saturation level: 0

• Hue level: 0

• Red Level: 0

• Green Level: 0

• Blue Level: 0

• Coarse Phase: 0

• Fine Phase: 0

• X Position: 0

• Y Position 0

To restore the card’s default settings:

1. Turn the selection knob to highlight Restore Defaults and press the

ENTER button.

2. Press the soft button labeled Yes to restore the default setting or press the

soft button labeled No to cancel and return to the list of options for the input

card.

HDCP Check Complete

Input

: (

DMC

CAT)

Max devices Allowed