Specifications

DigitalMedia Switchers Crestron DM-MD8X8/16X16/32X32
60
•
DigitalMedia Switchers: DM-MD8X8/16X16/32X32 Operations Guide – DOC. 6755D
• Best Common
Best Common
DISPLAY 1
DISPLAY 2
DISPLAY 1
1920x1080p 60 Hz
1920x1080p 50 Hz
1920x1080p 24 Hz
1920x1080i 30 Hz
1920x1080i 25 Hz
1280x720p 60 Hz
1280x720p 50 Hz
720x576p 50 Hz
720x480p 60 Hz
DISPLAY 2
1920x1080i 30 Hz
1920x1080i 25Hz
1400x1050p 60 Hz
1400x1050p 50Hz
1280x720p 60 Hz
1280x720p 50 Hz
1024x768 60 Hz
720x576p 50 Hz
720x480p 60 Hz
BEST COMMON
1920x1080i 30 Hz
1920x1080i 25 Hz
1280x720p 60 Hz
1280x720p 50 Hz
720x576p 50 Hz
720x480p 60 Hz
Only resolutions that are available in all of the displays that are connected
will be transmitted to the source. This ensures that any video signal coming
in from the source will be able to be shown on all displays. If certain
resolutions are only available on a subset of the displays, they will be
omitted.
• Manual
Use Crestron Toolbox to select which resolutions are transmitted to the
source.
“Best Common” is initially set to use information from all displays, but can be
modified to use information from just a subset of displays by deselecting them in
Crestron Toolbox.
By managing which displays are used for the EDID calculations, you can maximize
the resolution of each source while ensuring that the source can be shown on each
display where it is needed.
The EDID calculations also affect audio formats. Each HDMI receiver sends its
supported audio formats to the source in the following format:
<Format> <Maximum # of channels> <sampling freq supported>
For example, a 5.1channel audio processor may have the following audio EDID
information:
• Linear PCM, 2ch, 32/44.1/48kHz
• AC3, 6ch, 32/44.1/48kHz
• DTS, 6ch, 32/44.1/48kHz
Under “Best Common”, the same rules apply to audio as video.
For more information, refer to the Crestron Toolbox help file.