Specifications

DigitalMedia Switchers Crestron DM-MD8X8/16X16/32X32
58
•
DigitalMedia Switchers: DM-MD8X8/16X16/32X32 Operations Guide – DOC. 6755D
To remove all of the outputs from the test list, press the soft button labeled
None.
To remove an output from the test, highlight the output with the selection
knob and press the ENTER button.
NOTE: If an output uses a cable type that is different than the cable type
selected in the previous step, remove it from the list of outputs to be tested.
Repeat the data rate check using the installed cable type.
After the outputs to be tested are selected, press the soft button labeled
Next.
6. Verify that all sources and selected outputs are powered on and press the
soft button labeled OK to begin the data rate check. A progress bar will be
displayed to show the progress of the data rate check.
Data Rate Check in Progress
Data Rate Check
Test in Progress...
OK
When the test is complete the results will be displayed.
Data Rate Check Results-Success
Data Rate Check - Success
Kid’s Room – 2.22Gbps
Living Room – 3.60Gbps
Kitchen – 2.22Gbps
Resolution
Done
If an error was encountered during the data rate check, an error message
will be displayed.