Specifications

DigitalMedia Switchers Crestron DM-MD8X8/16X16/32X32

•

DigitalMedia Switchers: DM-MD8X8/16X16/32X32 Operations Guide – DOC. 6755D

Ear Attachment for Rack Mounting (DM-MD8X8 shown)

USE COVER SCREWS

4. Repeat procedure (steps 1 through 3) to attach the remaining ear to the

opposite side.

Stacking

Four “feet” are provided with the DM-MD8X8, DM-MD16X16 and the

DM-MD32X32 so that if the units are not rack mounted, the rubber feet can provide

stability when the units are placed on a flat surface or stacked. These feet should be

attached near the corners prior to the hookup procedure.

NOTE: No more than two DM switchers should be stacked.

Hardware Hookup

Connect the Device

Make the necessary connections as called out in the illustration that follows this

paragraph. For details on making connections to installed DM input cards and DM

output cards, refer to “Appendix A: Hardware Hookup for DM Cards” on page 70.

Apply power after all connections have been made.

When making connections to the DM switcher, use Crestron power supplies for

Crestron equipment.