Specifications

Crestron DM-MD8X8/16X16/32X32 DigitalMedia Switchers
Operations Guide – DOC. 6755D DigitalMedia Switchers: DM-MD8X8/16X16/32X32
•
27
Connectors, Controls & Indicators (Continued)
# CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
18 24ABG/EIG 1 – 4
(SLOT 1 – 8)
DM-MD8X8
(8) sets of (1) 4-pin and (1) 3-pin 3.5 mm
detachable terminal blocks
DM-MD16X16
(16) sets of (1) 4-pin and (1) 3-pin 3.5 mm
detachable terminal blocks
DM-MD32X32
(32) sets of (1) 4-pin and (1) 3-pin 3.5 mm
detachable terminal blocks
The following applies to all DM switchers:
Comprises (8, 16, or 32) DMNet ports with
“EIG” power selection ports, each set
associated with a corresponding DM output
port on the output card in either output slot;
Each DMNet port provides power and
communications for a DM device connected
via DM cable;
Each EIG port connects to an external power
supply
3
, or to the internal power source via a
jumper, to power the DM device connected to
the corresponding DMNet port;
Maximum Load: 75 Watts (3.13 Amps @ 24
Volts DC) per port, when connected to
external power supply
3
, otherwise limited to
available DMNet power
19 100–240V ~ 4.0A/7.0A
50/60 Hz
(1) IEC Socket, main power input; Mates with
removable power cord (included)
DM-MD8X8: 4.0 Amps Max. Current Draw
DM-MD16X16: 7.0 Amps Max. Current Draw
DM-MD32X32: 11 Amps Max. Current Draw
20 GROUND (1) 6-32 screw, chassis ground lug
1. Interface connectors for DMNET and EIG ports are provided with the unit.
2. Output cards on DM-MD8X8 and DM-MD32X32 are field-installable (DMC-series). Output cards on
DM-MD16X16 (DMCO-series) require factory installation.
3. For external DMNet power, use Crestron CNPWS-75, C2N-SPWS300, or other Cresnet power supply
as required.