Specifications

Crestron DM-MD8X8/16X16/32X32 DigitalMedia Switchers

Operations Guide – DOC. 6755D DigitalMedia Switchers: DM-MD8X8/16X16/32X32

•

173

b. The current selection is indicated with an asterisk (*). Turn the

selection knob to highlight Off or On and press the ENTER

button.

• Audio Output Level:

a. Turn the selection knob to highlight Audio Output Level and

press the ENTER button.

Audio Output Level

-52 dB

b. Turn the selection knob to adjust the audio output level.

c. Press the MENU button to return to the list of options for the

output card.

3. To exit and return to the list of available functions, press the MENU button.

Fiber Output Information

(DM Fiber-Equipped Outputs)

Cards equipped with DM fiber outputs can provide information on the HDCP state,

the deep color setting, the audio signal that is being passed through, and EDID. To

view information on the fiber output:

1. Open the Outputs section and select an output as described on page 170.

2. Turn the selection knob to highlight Fiber Output Settings and press the

ENTER button. A list of available data will be displayed. Some categories

such as Audio and EDID Device Information will display detailed

information when highlighted with the selection knob and selected by

pressing the ENTER button. Allow Deep Color can be used to determine

whether deep color can be sent over the output. To enable or disable deep

color:

a. Turn the selection knob to highlight Allow Deep Color and press the

ENTER button.