Specifications

Crestron DM-MD8X8/16X16/32X32 DigitalMedia Switchers
Operations Guide – DOC. 6755D DigitalMedia Switchers: DM-MD8X8/16X16/32X32
•
171
3. Select letters (upper and lower-case), numbers, or other characters by
turning the selection knob until the desired letter, number, or other character
is displayed on the LCD. Move the cursor to another position by pressing
the soft buttons labeled

and

. To delete a character, press the soft
button marked Del.
NOTE: The maximum length for any output name is 32 characters.
4. After the new name has been entered, press Done to save the name and
return to the list of options for the output.
DM CAT Output Information
(DM CAT-Equipped Outputs)
The DM output can provide information on the HDCP state, the deep color setting,
the audio signal that is being passed through, EDID information, the selected DM
cable type, and DM device depth. To view information on the DM CAT output:
1. Open the Outputs section and select an output as described on page 170.
Turn the selection knob to highlight DM Output Settings and press the
ENTER button. A list of available data will be displayed. Some categories
such as Audio, EDID Device Information, Allow Deep Color, DM Cable
Type and DM Device Depth, will display detailed information when
highlighted with the selection knob and selected by pressing the ENTER
button.
a. The output can be set to enable or disable the deep color feature of the
carried video signal. To enable or disable deep color:
i. Turn the selection knob to highlight Allow Deep Color and press the
ENTER button.
Allow Deep Color Mode
Allow Deep Color Mode
* Off
On
ii. The current selection is indicated with an asterisk (*). Turn the
selection knob to highlight Off or On and press the ENTER button.
b. When DM Cable Type is selected, the type of DM cable used to
connect the output can be displayed or changed.