Specifications

DM-MD8X8 8x8 DigitalMedia
Switcher
crestron.com
|
800.237.2041
Back at the switcher, the digital stereo signal is also converted to analog to
enable sharing with every other room in the house via a Sonnex
®
Multiroom Audio System or any other audio distribution system. The
DM-MD8X8 also allows surround sound processors and amplifiers to be
located centrally instead of at the display location via optional local
HDMI outputs.
Built-in Ethernet Switch
In addition to transporting digital video and audio, DigitalMedia can also
extend 10/100 Ethernet out to each display and source device via select
DM receivers and transmitters, providing high-speed connectivity for any
room device that requires a LAN connection. Ethernet is also utilized
internally by the Crestron control bus to manage all of the DM devices in
the system and provide display control in each room.
Private Network Mode
To streamline its implementation on a corporate or university LAN, the
DM-MD8X8 employs Private Network Mode to provide a single-point
connection for the complete system. Using Private Network Mode, the
DM-MD8X8 requires just one IP address for the complete DM network
including all connected DM receivers and transmitters.
USB Signal Routing
Along with video, audio, and Ethernet, DigitalMedia also provides for the
routing of USB HID (Human Interface Device) signals, allowing a USB HID
compliant keyboard and/or mouse at one location to control a computer or
media server at another location. USB HID connectivity is provided through
select DM receivers, transmitters, and input cards.
Crestron also offers USB extenders to enable the routing of virtually
any type of USB peripheral to any host device, all managed through the
DigitalMedia system. Connect a USB over Ethernet Extender host module
(USB-EXT-DM-LOCAL
[13]
) to each computer, media server, game system,
annotator, and any other host that you want to control or communicate
with. Then, install a device module (USB-EXT-DM-REMOTE
[13]
) at every
display location to connect keyboards, mice, game controllers, white-
boards, flash drives, Web cameras, and mobile devices. Every module
communicates with the DM switcher over the local Ethernet network or
via a direct connection to the LAN port of a DM transmitter or receiver.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely the
control desired for a seamless user experience. DigitalMedia provides an
alternative to conventional IR and RS-232 device control by harnessing the
CEC (Consumer Electronics Control) signal embedded in HDMI. Through its
connection to the control system, the DM-MD8X8 provides a gateway for
controlling many devices right through their HDMI connections, potentially
eliminating the need for any dedicated control wires or IR emitters.
Through proper CEC signal management, DigitalMedia allows you to take
control of each device as you like.
Easy Setup
Via the front panel or using Crestron Toolbox software, every step of the
DM-MD8X8’s setup process is designed to be quick and easy, configuring
inputs and outputs automatically while letting the installer make intelligent
design decisions along the way. The switcher even tests and measures the
length of each DM cable, automatically making the appropriate calibrations
for optimal signal transmission to every room. With DigitalMedia, an entire
8x8 system can be commissioned in under an hour.
To configure a DM switcher complete with input and output cards, cables,
and other peripherals, please use the DigitalMedia
Switcher
Configuration Tool.
Please refer to the DigitalMedia Resources Webpage at
http://www.crestron.com/dmresources/ for additional design tools and
reference documents.
SPECIFICATIONS
Maximum DM 8G
®
Cable Lengths
Cable Type:
Resolution:
DM-CBL-ULTRA
DM
®
Ultra
Cable
DM-CBL-8G
DM 8G
®
Cable
3rd-Party
CAT5e
(or better)
UTP or STP
1080p60 Full HD
330 ft (100 m)
via any DM 8G+ cards
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 2K DCI
@24Hz
2048x1080 2K DCI
@60Hz
330 ft
(100 m)
via “4K”
DM 8G+
cards
230 ft
(70 m)
via “4K”
DM 8G+
cards
165 ft
(50 m)
via “4K”
DM 8G+
cards
2560x1440 WQHD
2560x1600 WQXGA
3840x2160 Ultra HD
4096x2160 4K DCI
Cable Type:
Resolution:
CRESFIBER8G
CresFiber
®
8G
Multimode Fiber
3rd-Party
OM3
Multimode Fiber
1080p60 Full HD
1000 ft (300 m)
via DM 8G Fiber cards
500 ft (150 m)
via DM 8G Fiber cards
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 2K DCI
@24Hz
Cable Type:
Resolution:
CRESFIBER8G-SM
CresFiber 8G
Single-Mode Fiber
3rd-Party
G.652.D (or better)
Single-Mode Fiber
1080p60 Full HD
7.5 miles (12 km)
via DM 8G SM Fiber cards
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 2K DCI
@24Hz