Installation guide

Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers
Operations & Installation Guide – DOC. 7318D DigitalMedia Switchers: DM-MD64X64/DM-MD128X128
•
57
Hardware Hookup
Make the necessary connections as called out in the illustration below.
Hardware Connections for the DMB-I-S2
INPU
T SMF/LC:
From DM 8G SMF
Fiber Output of DM
Transmitter or
Other DM Device
NOTE: Fiber optic cable connectors and cable ends should be protected from
contamination and scratching at all times. When cable is not connected, protect the
optical transceivers on the DMB-I-S2 by using the included caps. Fiber ends should
be handled carefully and the cable should not be bent or coiled tightly.