Installation guide

DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128

•

DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC. 7318D

Using an SD Card or USB Flash Drive

NOTE: The SD card must be a minimum of 2 GB. A 2 GB SD card is included with

the DM switcher. An SDHC™ card can also be used.

NOTE: Upgrading firmware using a USB flash drive is applicable to the

DM-MD128X128 only.

To upgrade firmware using an SD card or a USB flash drive, do the following:

1. Remove the SD card from the MEMORY slot of the DMB CPU blade of

the DM switcher, and insert the card into the SD card slot of a PC.

NOTE: If a USB flash drive is to be used to upgrade firmware of the

DM-MD128X128, insert the USB flash drive into the USB port of a PC.

2. Download the latest firmware file from the Crestron website to the PC. The

firmware file is named dm-md64x64_X.XXX.XXXX.zip for the

DM-MD64X64 and dm-md128x128_X.XXX.XXXX.zip for the

DM-MD128X128 (X.XXX.XXXX represents the version number, for

example, dm-md64x64_1.001.0019.zip or dm-md128x128_1.001.0019.zip).

3. Copy the firmware file to the SD card or USB flash drive—do not copy the

file to a subfolder.

4. Insert the SD card into the MEMORY slot of the DMB CPU blade, or, if a

USB flash drive is being used for the DM-MD128X128, insert the USB

flash drive into the USB port of the DMB CPU blade.

5. Using either the front panel touch screen or a web browser, do the

following:

a. On the main screen of the DM switcher, select

The “Selection Menu” screen appears.

b. Select Firmware.

The “Firmware Setup” screen appears.

c. Select Update.