Crestron DM-MD64X64/ DM-MD128X128 DigitalMedia™ Switchers Operations & Installation Guide
This device includes an aggregation of separate independent works that are each generally copyrighted by Crestron Electronics, Inc., with all rights reserved. One of those independent works, Linux Bridge Project, is copyrighted under the GNU GENERAL PUBLIC LICENSE, Version2, reproduced in “GNU General Public License” on page 75, where the corresponding source code is available at: ftp://ftp.crestron.com/gpl. The specific patents that cover Crestron products are listed at patents.crestron.com.
Regulatory Compliance As of the date of manufacture, the DM-MD64X64 and DM-MD128X128 have been tested and found to comply with specifications for CE marking. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Contents DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Applications.................................................................................................................
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Introduction Crestron® DM® switchers provide the foundation for a complete DigitalMedia™ system, delivering an advanced 4K ultra high-definition AV signal routing solution that is extremely flexible and installer friendly. The DM-MD64X64 and DM-MD128X128 are modular matrix switchers designed for large-scale projects demanding ultimate reliability.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Features and Functions (Continued) • • • • • • • • • • • • • • • • Allows up to 330 foot (100 meter) wire distance via DM 8G+™ and HDBaseT1, 2, 3 Allows up to 1000 foot (300 meter) wire distance via DM 8G fiber3, 4 Allows up to 7.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Featuring a scalable blade-based design, the DM switchers afford maximum input and output count in a condensed 14 U (DM-MD64X64) or 24 U (DM-MD128X128) rack-mountable chassis. The DM-MD64X64 is field configurable to handle up to 64 inputs and 64 outputs; the DM-MD128X128 is field configurable to handle up to 128 inputs and 128 outputs. The DM switchers support HDMI, HDBaseT, analog audio, and all types of DigitalMedia 8G™ signals.
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 HDBaseT Certified Crestron DigitalMedia 8G+™ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with third-party HDBaseT products. Via DM 8G+, the DM switchers can be connected directly to any HDBaseT compliant device without requiring a DM transmitter or receiver.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers A Scaler for Every Display Scaling capability can be added to any DM system using select DM receivers (sold separately) with built-in high-definition scalers. By placing an independent high-performance scaler at every display device, DigitalMedia delivers the most flexible and user-friendly solution for routing multiple disparate sources to many different display devices.
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 Touch Screen Front Panel Simplified setup and operation of the DM switchers are provided through a large 15” color touch screen. Through its user-friendly graphical interface, the touch screen enables the routing of AV signals with the ability to view resolution and format information for every input and output signal, and even preview a live video image of any input.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Applications The diagram below shows a DM-MD64X64 in a typical application. DM-MD64X64 in a Typical Application Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Specifications Specifications for the DM switchers are listed in the following table.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DM Switcher Specifications (Continued) SPECIFICATION DETAILS Communications (Continued) 2 DigitalMedia DM 8G+ (HDBaseT compliant), DM 8G fiber, DM 8G SM fiber, HDCP management, EDID format management, CEC Ethernet Switch 19-port switch (DM-MD64X64) or 35-port switch (DM-MD128X128) with Private Network Mode; Provides (1) rear panel 10BASE-T/ 100BASE-TX/1000BASE-T LAN port, (1) 10BASE-T/100BASE-TX/1000BASE-T rear panel SERVICE port, and (16) DM-
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DM Switcher Specifications (Continued) SPECIFICATION DETAILS Dimensions Height DM-MD64X64: 24.44 in (621 mm) Width 19.00 in (483 mm) Depth DM-MD64X64: 16.26 in (413 mm) without I/O blades DM-MD128X128: 41.97 in (1066 mm) DM-MD128X128: 16.26 in (413 mm) without I/O blades, 19.55 in (497 mm) including front and rear handles Weight DM-MD64X64: 49.0 lb (22.3 kg) without I/O blades DM-MD128X128: 86.0 lb (39.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DM Switcher Specifications (Continued) SPECIFICATION DETAILS Available Accessories (Continued) DM-8G-CRIMP Crimping Tool for DM-8G-CONN DM-8G-CRIMP-WG Crimping Tool for DM-8G-CONN-WG DM-CBL-8G DigitalMedia 8G Cable DMB-4K-I-HD 8-Channel 4K HDMI Input Blade for DM Switchers DMB-4K-O-C 8-Channel 4K DM 8G+ Output Blade for DM Switchers DMB-I-S 8-Channel DM 8G Fiber Input Blade for DM Switchers DMB-I-S2 8-Channel DM 8G Single-Mode Fiber In
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 Physical Description This section provides information on the connections, controls, and indicators available on the DM switchers. DM-MD64X64 Physical View (Front) DM-MD64X64 Physical View (Rear) 12 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DM-MD128X128 Physical View (Front) Operations & Installation Guide – DOC.
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 DM-MD128X128 Physical View (Rear) 14 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DM-MD64X64 Overall Dimensions (Front View) 19.00 in (483 mm) 18.31 in (465 mm) 17.28 in (439 mm) 24.44 in (621 mm) 21.50 in (547 mm) 10.00 in (254 mm) 1.47 in (38 mm) Operations & Installation Guide – DOC.
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 DM-MD64X64 Overall Dimensions (Side View) 15.06 in (383 mm) 16 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DM-MD128X128 Overall Dimensions (Front View) 19.00 in (483 mm) 18.31 in (465 mm) 17.28 in (439 mm) 14.00 in (356 mm) 41.97 in (1066 mm) 11.00 in (280 mm) 14.00 in (356 mm) Operations & Installation Guide – DOC.
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 DM-MD128X128 Overall Dimensions (Side View) 19.55 in (497 mm) 17.80 in (453 mm) 15.90 in (404 mm) 18 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DM-MD64X64 Connectors, Controls, and Indicators (Front View) 1 2 3 4 5 6 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DM-MD64X64 Connectors, Controls, and Indicators (Rear View) 8 7 9 10 11 12 12 11 15 13 14 20 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DM-MD128X128 Connectors, Controls, and Indicators (Front View) 1 2 3 4 5 6 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DM-MD128X128 Connectors, Controls, and Indicators (Rear View) 7 8 9 10 11 12 12 12 13 15 14 22 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Connectors, Controls, and Indicators # CONNECTORS, CONTROLS, AND INDICATORS DESCRIPTION 1 Touch Screen 15 inch (381 mm) diagonal TFT active matrix color LCD, 15:9 WXGA, 1280 x 768 pixels, resistive touch membrane, amplified speakers; Provides signal routing, video input preview, video and audio signal information, system diagnostics, setup and configuration 2 Touch Screen Hard Key Not used COMPUTER (1) USB Type B female; USB computer conso
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Connectors, Controls, and Indicators (Continued) # CONNECTORS, CONTROLS, AND INDICATORS DESCRIPTION 11 100-127V ~ 50/60Hz 16A, 200-240V ~ 50/60Hz 8A (2 [DM-MD64X64] or 3 [DM-MD128X128]) IEC 60320 C-20 main power inlets; Mate with removable power cords 2 (included) 12 POWER SUPPLY (1-2 or 1-3) (2 [DM-MD64X64] or 3 [DM-MD128X128]) High efficiency (>90%), hot-swappable, variable speed fan cooled power supplies, Crestron model DM-MDA-64-PWS (inc
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Setup Network Wiring When wiring the DM network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. CAUTION: Failure to use Crestron power supplies could cause equipment damage or void the Crestron warranty. • Provide sufficient power to the system.
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 For information specifically related to Ethernet connectivity using DigitalMedia devices, refer to the Crestron IP Considerations Guide for the IT Professional (Doc. 4579) at www.crestron.com/dmresources. Ethernet Setup The DM switcher can operate in DHCP or Static IP Address mode. When DHCP is enabled, the IP address is set dynamically. When DHCP is disabled, the IP address is set manually.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Identity Code The IP ID can be set from the front panel touch screen or from a web browser. The IP IDs of multiple DM switchers in the same system must be unique. When setting the IP ID, consider the following: • The IP ID of each unit must match an IP ID specified in the Crestron Studio™ or SIMPL Windows program. • Each device using IP to communicate with a control system must have a unique IP ID.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers NOTE: Observe the following guidelines when installing equipment in a rack: • Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Foot Placement for the DM Switchers (DM-MD64X64 Shown) Place Feet in Corners Hardware Hookup Make the necessary connections as called out in the following illustrations. Refer to “Network Wiring” on page 25. Apply power after all connections have been made. NOTE: Ensure that the unit is properly grounded by connecting the chassis ground lug to an earth ground (building steel).
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 Hardware Connections for the DM-MD64X64 (Front) COMPUTER: To USB Port on PC 30 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Hardware Connections for the DM-MD64X64 (Rear) INPUT (1-8): Accept DMB-I Series Input Blades for Connection to DM Transmitters or Other DM Devices OUTPUT (1-8): Accept DMB-O Series Output Blades for Connection to DM Receivers or Other DM Devices CPU: Accepts CPU Blade (Included) 100-127V~50/60Hz 16A 200-240V~50/60Hz 8A: Main Power Input Operations & Installation Guide – DOC.
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 Hardware Connections for the DM-MD128X128 (Front) COMPUTER: To USB Port on PC 32 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Hardware Connections for the DM-MD128X128 (Rear) INPUT (1-16): Accept DMB-I Series Input Blades for Connection to DM Transmitters or Other DM Devices OUTPUT (1-16): Accept DMB-O Series Output Blades for Connection to DM Receivers or Other DM Devices CPU: Accepts CPU Blade (Included) 100-127V~50/60Hz 16A 200-240V~50/60Hz 8A: Main Power Inputs Ground Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers User Interface Overview The DM switcher provides a user interface that allows various functions to be performed.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. NOTE: Crestron software and any files on the website are for authorized Crestron dealers and Crestron Service Providers (CSPs) only. New users must register to obtain access to certain areas of the site (including the FTP site).
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Using an SD Card or USB Flash Drive NOTE: The SD card must be a minimum of 2 GB. A 2 GB SD card is included with the DM switcher. An SDHC™ card can also be used. NOTE: Upgrading firmware using a USB flash drive is applicable to the DM-MD128X128 only. To upgrade firmware using an SD card or a USB flash drive, do the following: 1.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DM-MD64X64 and DM-MD128X128 Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Audio or video is distorted. Source does not match capabilities of destination. Check EDID capabilities of devices in the system. Video loss occurs.
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 Reference Documents All documents mentioned within this guide are available from the Crestron website. List of Related Reference Documents DOCUMENT TITLE Crestron DigitalMedia Design Guide (www.crestron.com/dmresources) Crestron e-Control Reference Guide (www.crestron.com/manuals) Crestron IP Considerations Guide for the IT Professional (www.crestron.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Appendix: DigitalMedia Blades DigitalMedia blades for the DM switchers consist of the following: • CPU blade (is shown below) • Input blades (refer to page 43) • Output blades (refer to page 58) CPU Blade A CPU blade is included with each DM switcher. The DMB-CPU-64 is the CPU blade for the DM-MD64X64; the DMB-CPU-128 is the CPU blade for the DM-MD128X128. Either CPU blade can be purchased separately to provide a backup replacement.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Physical Description Connectors, controls, and indicators are shown below. DMB-CPU-64/DMB-CPU-128 Connectors, Controls, and Indicators DMB-CPU-64 1 DMB-CPU-128 2 1 2 3 3 4 4 5 5 6 6 8 7 40 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 7 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Connectors, Controls, and Indicators # CONNECTORS, CONTROLS, AND INDICATORS 1 ACT LED (1) Green LED, indicates CPU activity 2 MSG LED (1) Red LED, indicates CPU has generated an error message 3 CPU RESET 4 (1) Recessed miniature push button, reboots the CPU and front panel LAN Pin 8 Amber LED Pin 1 Green LED 5 SERVICE Pin 8 Amber LED Pin 1 Green LED 6 MEMORY 7 AUDIO OUT + − L G + − R 8 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Hardware Hookup Make the necessary connections as called out in the illustration below.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Input Blades DigitalMedia input blades for the DM switchers include the following: • DMB-4K-I-HD, 8-channel 4K HDMI input blade (is shown below) • DMB-I-S, 8-channel DigitalMedia 8G fiber input blade (refer to page 48) • DMB-I-S2, 8-channel DigitalMedia 8G single-mode fiber input blade (refer to page 53) DMB-4K-I-HD The DMB-4K-I-HD is an input blade that provides eight HDMI inputs.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-4K-I-HD Specifications (Continued) SPECIFICATION DETAILS Video Input Resolutions Progressive (Continued) 2048 x 1080 @ 24 Hz 2048 x 1152 @ 60 Hz 2560 x 1440 @ 60 Hz 2560 x 1600 @ 60 Hz 3840 x 2160 @ 24 Hz 3840 x 2160 @ 25 Hz 3840 x 2160 @ 30 Hz 2 3840 x 2160 @ 50 Hz 2 3840 x 2160 @ 60 Hz 4096 x 2160 @ 24 Hz 2 4096 x 2160 @ 50 Hz 2 4096 x 2160 @ 60 Hz plus any other resolution allowed by HDMI up to 300 MHz pixel clock Interlaced 720 x 480 @
Crestron DM-MD64X64/DM-MD128X128 Physical Description DigitalMedia Switchers Connectors, controls, and indicators are shown below. DMB-4K-I-HD Connectors, Controls, and Indicators 1 2 3 4 5 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Connectors, Controls, and Indicators * # CONNECTORS, CONTROLS, AND INDICATORS 1 ACT LED (1) Green LED, indicates blade activity 2 MSG LED (1) Red LED, indicates an error message has been generated 3 INPUT HD 1-8 LEDs (8) Dual-color red/green LEDs, indicate video lock and HDCP status for each corresponding input 4 INPUT HD 1-8 (8) 19-pin Type A HDMI female; HDMI digital video/audio inputs; Also support DVI and DisplayPort Multimode* 5
Crestron DM-MD64X64/DM-MD128X128 Hardware Hookup DigitalMedia Switchers Make the necessary connections as called out in the illustration below. Hardware Connections for the DMB-4K-I-HD INPUT HD 1-8: From HDMI Digital Video/Audio Inputs ANALOG AUDIO INSERT: From Analog Audio Breakout Box (Sold Separately) Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-I-S The DMB-I-S is an input blade that provides eight DM 8G fiber inputs. Each DM 8G fiber input enables the connection of a DM 8G fiber transmitter or the output of another DM switcher. One multimode fiber optic strand is required per input, each supporting distances up to 1000 feet (300 meters) using CresFiber® 8G multimode fiber optic cable.* Specifications Specifications for the DMB-I-S are listed in the following table.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-I-S Specifications (Continued) SPECIFICATION DETAILS Video Input Resolutions (Continued) Interlaced 720 x 480 @ 30 Hz (480i) 720 x 576 @ 25 Hz (576i) 1920 x 1080 @ 25 Hz (1080i25) 1920 x 1080 @ 30 Hz (1080i30) plus any other resolution allowed by HDMI up to 165 MHz pixel clock Audio Input Signal Type DM 8G fiber Formats Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Maste
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Physical Description Connectors and indicators are shown below. DMB-I-S Connectors and Indicators 1 2 4 3 50 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Connectors and Indicators * # CONNECTORS AND INDICATORS DESCRIPTION 1 ACT LED (1) Green LED, indicates blade activity 2 MSG LED (1) Red LED, indicates an error message has been generated 3 INPUT MMF/SC LEDs (8) Green LEDs, indicate DM link status for each corresponding input 4 INPUT MMF/SC 1-8 (8) SC female optical fiber connectors; DM 8G fiber inputs; Each connects to the DM 8G fiber output of a DM transmitter or other DM device via
DigitalMedia Switchers Hardware Hookup Crestron DM-MD64X64/DM-MD128X128 Make the necessary connections as called out in the illustration below. Hardware Connections for the DMB-I-S INPUT MMF/SC: From DM 8G Fiber Output of DM Transmitter or Other DM Device NOTE: Fiber optic cable connectors and cable ends should be protected from contamination and scratching at all times. When cable is not connected, protect the optical transceivers on the DMB-I-S by using the included caps.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-I-S2 The DMB-I-S2 is an input blade that provides eight DM 8G SM fiber inputs. Each DM 8G SM fiber input enables the connection of a DM 8G SM fiber transmitter or the output of another DM switcher. One single-mode fiber optic strand is required per input, each supporting distances up to 7.5 miles (12 km) using CresFiber 8G SM or G.652.D single-mode fiber.* Specifications Specifications for the DMB-I-S2 are listed in the following table.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-I-S2 Specifications (Continued) SPECIFICATION DETAILS Video Input Resolutions Interlaced 720 x 480 @ 30 Hz (480i) 720 x 576 @ 25 Hz (576i) 1920 x 1080 @ 25 Hz (1080i25) 1920 x 1080 @ 30 Hz (1080i30) plus any other resolution allowed by HDMI up to 165 MHz pixel clock Audio Input Signal Type DM 8G SMF Formats Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio, up t
Crestron DM-MD64X64/DM-MD128X128 Physical Description DigitalMedia Switchers Connectors and indicators are shown below. DMB-I-S2 Connectors and Indicators 1 2 4 3 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Connectors and Indicators * # CONNECTORS AND INDICATORS DESCRIPTION 1 ACT LED (1) Green LED, indicates blade activity 2 MSG LED (1) Red LED, indicates an error message has been generated 3 INPUT SMF/LC LEDs (8) Green LEDs, indicate DM link status for each corresponding input 4 INPUT SMF/LC 1-8 (8) LC female optical fiber connectors; DM 8G single-mode fiber inputs; Each connects to the DM 8G SMF output of a DM transmitter or other DM d
Crestron DM-MD64X64/DM-MD128X128 Hardware Hookup DigitalMedia Switchers Make the necessary connections as called out in the illustration below. Hardware Connections for the DMB-I-S2 INPUT SMF/LC: From DM 8G SMF Fiber Output of DM Transmitter or Other DM Device NOTE: Fiber optic cable connectors and cable ends should be protected from contamination and scratching at all times. When cable is not connected, protect the optical transceivers on the DMB-I-S2 by using the included caps.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Output Blades DigitalMedia output blades for the DM switchers include the following: • DMB-4K-O-C, 8-channel DigitalMedia 8G+ output blade (is shown below) • DMB-O-S, 8-channel DigitalMedia 8G fiber output blade (refer to page 64) • DMB-O-S2, 8-channel DigitalMedia 8G single-mode fiber output blade (refer to page 69) DMB-4K-O-C The DMB-4K-O-C is an output blade that provides eight DM 8G+ outputs.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-4K-O-C Specifications (Continued) SPECIFICATION DETAILS Video Input Resolutions Progressive (Continued) 1280 x 768 @ 60 Hz 1280 x 800 @ 60 Hz 1280 x 960 @ 60 Hz 1280 x 1024 @ 60 Hz 1360 x 768 @ 60 Hz 1365 x 1024 @ 60 Hz 1366 x 768 @ 60 Hz 1400 x 1050 @ 60 Hz 1440 x 900 @ 60 Hz 1600 x 900 @ 60 Hz 1600 x 1200 @ 60 Hz 1680 x 1050 @ 60 Hz 1920 x 1080 @ 24 Hz (1080p24) 1920 x 1080 @ 25 Hz (1080p25) 1920 x 1080 @ 50 Hz (1080p50) 1920 x 1080 @ 60 Hz
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-4K-O-C Specifications (Continued) SPECIFICATION DETAILS Available Accessories DM-8G-CONN DigitalMedia 8G Cable Connectors DM-8G-CONN-WG DigitalMedia 8G Cable Connector with Wire Guide DM-8G-CRIMP Crimping Tool for DM-8G-CONN DM-8G-CRIMP-WG Crimping Tool for DM-8G-CONN-WG DM-CBL-8G DigitalMedia 8G Cable PW-4830DUS 150 W Power Pack for PoDM 60 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 Physical Description DigitalMedia Switchers Connectors and indicators are shown below. DMB-4K-O-C Connectors and Indicators 1 2 3 4 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Connectors and Indicators # CONNECTORS, CONTROLS, AND INDICATORS 1 ACT LED (1) Green LED, indicates blade activity 2 MSG LED (1) Red LED, indicates an error message has been generated 3 OUTPUT DM 1-8 (8) 8-pin RJ-45 female, shielded; DM 8G+ outputs, HDBaseT compliant; PoDM and PoH PSE (Power Sourcing 1 Equipment) ports with two LEDs per port; Green LED indicates DM link status and amber LED indicates video and HDCP signal presence for each
Crestron DM-MD64X64/DM-MD128X128 Hardware Hookup DigitalMedia Switchers Make the necessary connections as called out in the illustration below. Hardware Connections for the DMB-4K-O-C OUTPUT DM 1-8: To DM 8G+ Input of DM or HDBaseT Device PoDM INPUT PWR: From PoDM Power Pack Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-O-S The DMB-O-S is an output blade that provides eight DM 8G fiber outputs. Each DM 8G fiber output enables connection to a DM 8G fiber receiver or to the input of another DM switcher. One multimode fiber optic strand is required per output, each supporting distances up to 1000 feet (300 meters) using CresFiber 8G multimode fiber optic cable.* Specifications Specifications for the DMB-O-S are listed in the following table.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-O-S Specifications (Continued) SPECIFICATION DETAILS Video Output Resolutions Progressive (Continued) 1920 x 1080 @ 24 Hz (1080p24) 1920 x 1080 @ 25 Hz (1080p25) 1920 x 1080 @ 50 Hz (1080p50) 1920 x 1080 @ 60 Hz (1080p60) 1920 x 1200 @ 60 Hz 2048 x 1080 @ 24 Hz 2048 x 1152 @ 60 Hz plus any other resolution allowed by HDMI up to 165 MHz pixel clock Interlaced 720 x 480 @ 30 Hz (480i) 720 x 576 @ 25 Hz (576i) 1920 x 1080 @ 25 Hz (1080i25) 192
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Physical Description Connectors and indicators are shown below. DMB-O-S Connectors and Indicators 1 2 4 3 66 • DigitalMedia Switchers: DM-MD64X64/DM-MD128X128 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Connectors and Indicators * # CONNECTORS AND INDICATORS DESCRIPTION 1 ACT LED (1) Green LED, indicates blade activity 2 MSG LED (1) Red LED, indicates an error message has been generated 3 OUTPUT MMF/SC (8) Green LEDs, indicate DM link status for each corresponding output 4 OUTPUT MMF/SC 1-8 (8) SC female optical fiber connectors; DM 8G fiber outputs; Each connects to the DM 8G fiber input of a DM receiver or other DM device via CRESF
DigitalMedia Switchers Hardware Hookup Crestron DM-MD64X64/DM-MD128X128 Make the necessary connections as called out in the illustration below. Hardware Connections for the DMB-O-S OUTPUT MMF/SC: To DM 8G Fiber Input of DM Receiver or Other DM Device NOTE: Fiber optic cable connectors and cable ends should be protected from contamination and scratching at all times. When cable is not connected, protect the optical transceivers on the DMB-O-S by using the included caps.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-O-S2 The DMB-O-S2 is an output blade that provides eight DM 8G SM fiber outputs. Each DM 8G SM fiber output enables connection to a DM 8G SM fiber receiver or to the input of another DM switcher. One single-mode fiber optic strand is required per output, each supporting distances up to 7.5 miles (12 km) using CresFiber 8G SM or G.652.D single-mode fiber.* Specifications Specifications for the DMB-O-S2 are listed in the following table.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers DMB-O-S2 Specifications (Continued) SPECIFICATION DETAILS Video Output Resolutions (Continued) Interlaced 720 x 480 @ 30 Hz (480i) 720 x 576 @ 25 Hz (576i) 1920 x 1080 @ 25 Hz (1080i25) 1920 x 1080 @ 30 Hz (1080i30) plus any other resolution allowed by HDMI up to 165 MHz pixel clock Audio Output Signal Type DM 8G SMF Formats Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Mast
Crestron DM-MD64X64/DM-MD128X128 Physical Description DigitalMedia Switchers Connectors and indicators are shown below. DMB-O-S2 Connectors and Indicators 1 2 4 3 Operations & Installation Guide – DOC.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers Connectors and Indicators * # CONNECTORS AND INDICATORS DESCRIPTION 1 ACT LED (1) Green LED, indicates blade activity 2 MSG LED (1) Red LED, indicates an error message has been generated 3 OUTPUT SMF/LC LEDs (8) Green LEDs, indicate DM link status for each corresponding output 4 OUTPUT SMF/LC 1-8 (8) LC female optical fiber connectors; DM 8G single-mode fiber outputs; Each connects to the DM 8G SMF input of a DM receiver or other DM d
Crestron DM-MD64X64/DM-MD128X128 Hardware Hookup DigitalMedia Switchers Make the necessary connections as called out in the illustration below. Hardware Connections for the DMB-O-S2 OUTPUT SMF/LC: To DM 8G SMF Fiber Input of DM Receiver or Other DM Device NOTE: Fiber optic cable connectors and cable ends should be protected from contamination and scratching at all times. When cable is not connected, protect the optical transceivers on the DMB-O-S2 by using the included caps.
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from Crestron. To obtain warranty service for Crestron products, contact an authorized Crestron dealer. Only authorized Crestron dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers GNU General Public License Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed. PREAMBLE The licenses for most software are designed to take away your freedom to share and change it.
DigitalMedia Switchers Crestron DM-MD64X64/DM-MD128X128 You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange for a fee. 2.
Crestron DM-MD64X64/DM-MD128X128 DigitalMedia Switchers modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide – DOC. 7318D (2035906) 04.14 Specifications subject to change without notice.
