Installation guide

DIN Rail 2-Series Automation Processor Crestron DIN-AP2
NOTE: The DIN-AP2 can only be powered by the 4-position terminal
block connector labeled NET.
Versiport
Connections
Depending on the application, the DIN-AP2’s Versiports can be wired
multiple ways. Refer to the following diagrams when wiring a Versiport.
WARNING: Incorrect wiring may damage the DIN-AP2 or the
connected device.
NOTE: The settings for input/output and the pull-up resistor are
specified in the control system program. For more information, refer to
the SIMPL Windows help file.
Versiport Wiring Diagrams - Digital Input Function
16 • DIN Rail Automation Processor: DIN-AP2 Operations & Installation Guide – DOC. 6662C