Specifications

Power Requirements
Main Power: 120 Volts AC, 50-60Hz
Audio
Controls: Volume, Balance, Bass, Treble, Loudness, Mute, Mono,
Input Compensation
Volume: Gain range-80dB to +20dB, 1 dB steps
Mute: -100dB (electronic), -120dB (relay)
Input Compensation: ±10dB
Bass Gain Range: ±12dB @ 100Hz, 2 dB steps
Treble Gain Range: ±12dB @ 10kHz, 2 dB steps
Frequency Response: 20Hz to 20kHz ±0.75dB
S/N Ratio: 98dB, 20Hz to 20kHz A-weighted
THD+N: 0.05%, 20Hz to 20kHz
Stereo Separation: >75dB
Connections
Sources: 1-6 (24) RCA female providing (6) unbalanced stereo line-level audio
inputs with parallel loop-thrus; connect to outputs of source devices, with loop-
thru to additional PAMPs
NET: 1-4 (6) 4-pin 3.5mm detachable terminal blocks; network ports, provide
data and power to Prodigy keypads
NET Loop-Thru: (2) 4-pin 3.5mm detachable terminal block
Computer: (1) USB Type B female; USB 1.1 computer console port
Rooms 1–4: (4) 4-pin 5mm detachable terminal blocks, power amplifier
outputs; wire size: 12 AWG maximum; output 50W per channel; 4 or 8 ohm
impedance, outputs 1+2 and 3+4 bridgeable
Fuse: 3A SLO-BLO 250v
120V~50-60Hz: (1) IEC male; mates with removable power cord (included)
Button and LED Indicator
Standby: Pushbutton with green LED places audio in standby
Mute: Pushbutton with red LED mutes audio in selected room
Source: (6) Pushbuttons with green LEDs selects source to route
Room: (4) Pushbuttons with green LEDs and labeling strip selects room
destination of source
Volume: 2-position up/down pushbutton adjusts volume of selected room
Environmental
Temperature: 41° to 122°F (5° to 50°C)
Humidity: 10% to 90% RH (non-condensing)
Dimensions
Height: 3.56 in (9.04 cm);3.47 (8.81 cm) without feet
Width: 17.03 in (43.26 cm)
Depth: 8.67 in (22.02 cm)
Weight
20.0 lbs (9.0 kg)
SPECIFICATIONS
!
27
crestron.eu/prodigy