Specifications

Load Ratings
Switch Channels: 8
Maximum Per Channel: 10 Amps incandescent, 5 Amps fluorescent, 0.5
HP @ 120 to 240 Volts AC, 50/60 Hz; 5 Amps @ 30 Volts DC; 16 Amps
Resistive
Module Total: 80 Amps incandescent, 40 Amps fluorescent @ 120 to 240
Volts AC, 50/60 Hz
Load Types*: Incandescent, Magnetic Low-voltage, Electronic Low-Voltage,
Neon/Cold Cathode, Fluorescent, Motors
Inputs:
Isolated low-voltage inputs; able to detect voltage between 12-24
VAC/DC
Power Requirements
Cresnet Power Usage 5.4 Watts (0.23 Amps @ 24 Volts DC)
Controls & Indicators
1 – 8
: (8) Red LEDs and (8) miniature pushbuttons for status indication and
local control of each channel
NET ID
: (2) 7-Segment green LED digits and (2) miniature pushbuttons for
setting Cresnet ID
SETUP
: (1) Red LED and (1) recessed miniature pushbutton for enabling
setup mode and touch-settable ID
OVR
: (1) Red LED and (1) miniature pushbutton for enabling override mode
and saving override presets
PWR
: (1) Green LED, illuminates when DC power is applied to the NET port
NET
: (1) Yellow LED, indicates communication with the control processor
RESET
: (1) Recessed miniature pushbutton, resets internal processor
Connectors
1 – 8
: (8) sets of (2) captive screw terminals; Isolated Class 1 SPST relay
switch circuits 1 – 8; Relay Rating: 10 Amps incandescent, 5 Amps
fluorescent, 16 Amps resistive, 0.5 HP @ 240 Volts AC (per channel);
Maximum Wire Size: 12 AWG (2.5 mm²)
Inputs 1-8:
9-pin 3,5 mm detachable terminal block comprising (8) isolated
inputs.
NET
: (2) 4-pin 3.5mm detachable terminal blocks, paralleled;Cresnet slave
port
OVERRIDE
: (2) 2-pin 3.5mm detachable terminal blocks, paralleled; Sensing
input for external low-voltage contact closure; Activates override mode when
a closure is present; Minimum Closure Rating: 10mA (per module) at 24
Volts
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 18BTU/hr
Enclosure
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0
rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for
enclosures with 45mm front panel cutout, occupies 9 DIN module spaces
(162mm)
Dimensions
Height: 3.71 in (9.42 cm)
Width: 6.26 in (15.90 cm)
Depth: 2.35 in (5.95 cm)
Weight
13.1 oz (369 g)
Required
DIN-PWS50
: DIN Rail 50 Watt Cresnet Power Supply (**)
- 50 Watt Cresnet power supply module
- Powers Cresnet devices
- Includes 3 Cresnet power ports
(*) May not be compatible with some high inrush current loads.
(**) Only one DIN-PWS50 per Prodigy System required
SPECIFICATIONS
!
17
crestron.eu/prodigy