Specifications

Touchscreen Display
Display Type: TFT active matrix color LCD
Size: 3.6 inch (9.1 cm) diagonal
Aspect Ratio: 4:3 QVGA
Resolution: 320 x 240 pixels
Brightness: 300 nits (cd/m2)
Contrast: 300:1
Color Depth: 16-bit, 64k colors
Illumination: Edgelit LED
Viewing Angle: ±80° horizontal, +80°/-50° vertical
Touchscreen: Resistive membrane
Buttons
Functions (10) translucent white backlit pushbuttons, programmable
Reset (1) miniature pushbutton behind faceplate, used to reset
touchpanel
Processor
CPU: 32-bit Freescale ColdFire
®
Microprocessor
Memory
DRAM: 16 MB
Flash: 8 MB
Maximum Project Size: 7 MB
Graphics Engine
Isys
™
engine; 16-bit non-palette graphics; 65,536 colors; Crestron Synapse
™
image rendering algorithm, multi-mode objects, dynamic graphics,
PNG translucency, full-motion (60 fps) animation
Ethernet
10BaseT/100BaseTX, auto-switching, auto-negotiating, auto-discovery,
full/half duplex, TCP/IP, CIP, DHCP, IEEE 802.3U compliant
Audio
Hardware Features: Built-in amplified speaker (rear),
internal volume control
Audio Feedback (WAV): 8-bit PCM, mono, 8 kHz sampling rate
Amplification: 1 Watt for built-in speaker
Connections
NET: (1) 4-pin 3.5mm detachable terminal block, for local power only
LAN: (1) 8-wire RJ45 with 2 LED indicators;10/100BaseT Ethernet port;
Green LED indicates link status; Yellow LED indicates Ethernet activity
Power Requirements
Power Usage: 5 Watts (0.21 Amp @ 24 Volts DC)
PW-2407W (included): 100-240 Volts AC, 50/60 Hz
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing) enclosure
Enclosure
Construction: Injection-molded plastic, flush-mountable using
clips provided (additional mounting kits available)
Faceplate: Injection-molded plastic
Dimensions
Height: 4.54 in (11.52 cm)
Width: 6.19 in (15.73 cm)
Depth: 2.13 in (5.40 cm)
Weight
15.0 oz (0.43 kg)
Included Accessories
PW-2407W: Power Supply
Available Accessories
BB-4L: Pre-Construction Wall Mount Back Box
PMK-4L: Pre-Construction Wall Mount Kit
TMK-4L: Trim Ring
MMK-4L: Mud Ring
WMKT-4L: Lectern or Post-Construction Wall Mount Kit with Trim Ring
WMKM-4L: Post-Construction Wall Mount Kit with Mud Ring
WMKB-4L: Replacement Wall Mount Clips
SPECIFICATIONS
!
13
crestron.eu/prodigy