Installation guide

Crestron DIN-8SW8-I DIN Rail High-Voltage Switch
Specifications
Specifications for the DIN-8SW8-I are listed in the following table.
DIN-8SW8-I Specifications
SPECIFICATION DETAILS
Load Ratings
Switch Channels 8
Maximum Per Channel 10 Amps incandescent,
5 Amps fluorescent,
0.5 HP @ 120-240 Volts AC,
50/60 Hz;
5 Amps @ 30 Volts DC
Minimum Per Channel 0.05 Amps @ 12 Volts DC
Module Total 80 Amps incandescent,
40 Amps fluorescent, @ 120-240
Volts AC, 50/60 Hz
Load Types
1
Incandescent, magnetic
low-voltage, electronic
low-voltage, neon/cold cathode,
fluorescent, motors
Digital Inputs
Minimum Pulse Time 50 ms
Minimum Input Voltage 12V DC or AC
Maximum Input Voltage 24V DC or AC
Power Requirements
Cresnet Power Usage 5.4 Watts (225 mA @ 24 Volts
DC)
Default Net ID 89
Minimum 2-Series Control
System Update File
2, 3
Version 4.000.0226 or later
(Continued on following page)
Operations & Installation Guide – DOC. 6930A DIN Rail High-Voltage Switch: DIN-8SW8-I • 5