Installation guide

Crestron DIN-8SW8-I DIN Rail High-Voltage Switch
DIN Rail High-Voltage Switch:
DIN-8SW8-I
DIN Rail High-Voltage Switch:
DIN-8SW8-I
Introduction Introduction
The DIN-8SW8-I is an eight channel high-voltage switching module
designed to support switching of non-dimmable lighting and fans. The
DIN-8SW8-I has eight isolated digital inputs, allowing standard
momentary switches to trigger relay events with or without a control
system. A single model supports both 120 and 220-240 Volt applications.
Each channel handles incandescent loads up to 10 Amps, fluorescent
loads up to 5 Amps and also ½ HP motors.*
* May not be compatible with some high inrush current loads.
Features and Functions
• Eight channels of power switching
• Supports 120-240 Volt 50/60 Hz
• Override input
• Cresnet
®
communications
• Setup via front panel or software
• Programmable functionality via DIN-AP2 or other 2-Series
control system (sold separately)
• 9M wide DIN rail mounting
• Eight digital inputs for local control with or without a control
system
Operations & Installation Guide – DOC. 6930A DIN Rail High-Voltage Switch: DIN-8SW8-I • 1