Installation guide

Crestron DIN-8SW8-I DIN Rail High-Voltage Switch
Locating the DIN-8SW8-I in the Device Library
2. The system tree of the control system displays the device in the
appropriate slot with a default Net ID as shown in the following
illustration.
C2Net Device, Slot 9
3. Additional DIN-8SW8-I devices are assigned different Net ID
numbers as they are added.
4. If necessary, double click a device to open the “Device Settings”
window and change the Net ID, as shown in the following figure.
Operations & Installation Guide – DOC. 6930A DIN Rail High-Voltage Switch: DIN-8SW8-I • 19