Installation guide

Crestron DIN-8SW8-I DIN Rail High-Voltage Switch
Hardware Connections for the DIN-8SW8-I
NET:
To Control System and
Other Cresnet Devices
OVERRIDE:
From Device Providing
Override Signal and to
Other Devices Receiving
Override Signal
1-8:
Connections for Controlled
Devices
INPUTS:
Connections from
Switches and Other
Control Devices
With the circuit breaker turned off, connect the wires to the terminal
blocks per the markings provided on the DIN-8SW8-I.
Load Connection Example for the DIN-8SW8-I
Neutral
Line
120/240 Volts
Load
120/240 Volts From
Breaker
Operations & Installation Guide – DOC. 6930A DIN Rail High-Voltage Switch: DIN-8SW8-I • 15