Installation guide

DIN Rail High-Voltage Switch Crestron DIN-8SW8-I

Connectors, Controls, & Indicators (Continued)

# CONNECTORS*,

CONTROLS & INDICATORS

DESCRIPTION

6 OVR

(LEDs and BUTTON)

(1) Red LED and (1) miniature

pushbutton for enabling Override

mode and saving override presets.

For more information, refer to

“Operation” which starts on page

23.

7 PWR LED (1) Green LED, illuminates when

DC power is applied to the NET

port

8 OVERRIDE

(2) 2-pin 3.5 mm detachable

terminal blocks, paralleled;

Maximum wire size: 1.5 mm

(16 AWG)

Sensing input for external

low-voltage contact closure;

Activates Override mode when a

closure is present;

Minimum closure rating:

10 mA (per module) at 24 Volts

9 RESET

(1) Recessed miniature

pushbutton, resets internal

processor

10 NET LED (1) Yellow LED, indicates

communication with the control

processor

* Interface connectors for NET, INPUTS and OVERRIDE ports are provided with the unit.

10 • DIN Rail High-Voltage Switch: DIN-8SW8-I Operations & Installation Guide – DOC. 6930A